cstm

[A.G.M. Velthof]

I was trying to figure out the memoryconfiguration on a D390 machine and used cstm.
The only information I get is
log creation time........
hardware path: 49

Anyone any idea?

[Robert-Jan Goossens]

could you post the command you used and the stm version.

# echo "selclass qualifier memory;info;wait;infolog" | cstm

Version A.44.00

Basic Memory Description

Module Type: MEMORY
Total Configured Memory : 1536 MB
Page Size: 4096 Bytes

Memory interleaving is supported on this machine and is ON.

Memory Board Inventory

DIMM Slot Size (MB)
--------- ---------
0a 512
1a 256
0b 512
1b 256
--------- ---------
System Total (MB): 1536

Memory Error Log Summary

The memory error log is empty.

Page Deallocation Table (PDT)

PDT Entries Used: 0
PDT Entries Free: 256
PDT Total Size: 256

Regards,
Robert-Jan

[Duncan Edmonstone]

did you 'wait' for the info command to complete?

echo "selclass qualifier memory;info;wait;infolog"|cstm



HTH

Duncan

[RAC_1]

Which version of STM?? Are you up to date on STM patches. Does it return ok on xstm or mstm??

What does following give.

echo "selclass qualifier memeory;info;wait;infolog" | cstm

Anil

[Devender Khatana]

Hi,

cstm
map all
infolog
Save this to a file using S option
In the file search for Basic & you should get all the details.

HTH,
Devender

[A.G.M. Velthof]

The version is A.13.00

[Andrew Merritt_2]

A.13.00 is a very, very old version, and it was for HP-UX 10.10. It does appear to be the most recent version of OnlineDiags for 10.10, at least.

Apart from waiting for the info command to complete, as suggested several times above, I'm not sure what to suggest, apart from upgrading the OS and OnlineDiags. You'll not get much support from HP if there is a problem with the info tool on 10.10, I'm afraid.

http://www.docs.hp.com/en/diag/stm/stm_upd.htm#table shows the versions.

Andrew

[Andrew Merritt_2]

Just realised the table is a little confused, and there are two entries for A.13.00. The second mentions 11.00 and 10.20.

If you are running 11.00 or 10.20, install the latest version of OnlineDiags for those releases and try again with the info tool.

Andrew

[Andrew Rutter]

hi, if stm won't run and you dont want to upgrade the version.

Reboot the server and stop it from booting at PDC
"press any key to stop booting"

Then type
in me
This will give you the slot configuration and size of dimms installed and free slots available.

Then just boot the system again.

Andy

[Bejoy C Alias]

echo "selclass qualifier memory;info;wait;infolog"|cstm > testfile
and see the contents of the file