D-class ethernet card driver

[RJA]

I have a D-class server, Model D250 (yes, I'm nostalgic.) Does anyone know where I can find the most recent driver for the EISA ethernet card in this system? lanscan shows this to be:

btlan0 CLAIMED INTERFACE EISA card INP0500.

The card is working, but I can't set it to 100FD, only 10HD, 100HD or AUTO_ON. I've seen some discussions that 100FD may not even work with this card. has anyone had any luck?

Thanks

[A. Clay Stephenson]

A newer driver won't help you. The highest possible setting for the EISA-based network cards is 100FD. HSC-based cards for the D boxes would allow 100FD.

[RJA]

Clay, do you mean 100HD for the EISA cards?

[A. Clay Stephenson · Accepted solution]

Sorry, yes. I meant 100Mbit, Half-Duplex is the maximum possible setting for your A3658A EISA card. If you want 100Mbit Full-Duplex then you need to find a J3515A or J3516A card.

[RJA]

OK - Thanks .. I will try to find one..

[RJA]

Will look into a replacement card..