HPE Community
Operating System - HP-UX
1842073 Members
2145 Online
110186 Solutions
New Discussion

Device nodeWWN/DevFile mismatch

 
SOLVED
Go to solution
Domenico Viggiani
Super Advisor

‎02-05-2003 01:02 AM

‎02-05-2003 01:02 AM

Device nodeWWN/DevFile mismatch

Hi,
EventMonitoringSystem (EMS) is continously sending following alarms:

Disk Array at hardware path 0/10/0/0.1.25.255.12.6.0 : DevicenodeWWN/DevFile mismatch.

Device is an HPA5236A (FC10) JBOD working without problems connected to two Brocade switches.

I tried an 'armdiscover -delete' and then 'armdiscover' with no results.
Where can I furtherly indagate?

Thanks
0 Kudos
Reply
1 REPLY 1
Steve Steel
Honored Contributor

‎02-05-2003 01:19 AM

‎02-05-2003 01:19 AM

Solution

Re: Device nodeWWN/DevFile mismatch

Hi


This happened in some versions and it is a fault in command view below 1.06.

Install SDM COMMAND VIEW Ver. 1.06 or later if it exists


Steve Steel
If you want truly to understand something, try to change it. (Kurt Lewin)
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.