Diagmond process aborting

[David White]

Approx 1 hour after starting the diagmond process it aborts with the following message in the syslog:

Exit due to initialization failure.

Whilst the diagmond process is running I am unable to run the xstm process fully.

This has started happening after the root mirror disk was replaced.

[Stefan Farrelly]

Sounds like the diags are having problem with the database/log they keep of hardware, which yours has now changed. Deinstall the diags and reinstall. On first starup after reinstall it should reinitialise everything and run aok for longer than 1 hour.

[Mervyn Stephens]

Thanks, Do you know if I need to do any thing with th ediag lif area?

Also reason for my response is taht Dav's login and mine had a problem?

[Mervyn Stephens]

Thanks, Do you know if I need to do any thing with th ediag lif area?

Also reason for my response is taht Dav's login and mine had a problem?

[Mervyn Stephens]

Thanks, Do you know if I need to do any thing with th ediag lif area?

Also reason for my response is that Dave's login and mine had a problem?

[Mervyn Stephens]

Thanks, Do you know if I need to do any thing with the diag lif area?

Also reason for my response is that Dave's login and mine had a problem?

[Mervyn Stephens]

Thanks, Do you know if I need to do any thing with the diag lif area?

Also reason for my response is that Dave's login and mine had a problem?

[Stefan Farrelly]

What do you mean by the diag lif area ??

When you replaced the mirror disk all the correct steps were carried out as per your sys admin manual ?? including testing you can boot off it successfully ?