DiskSystem 2300 and RP5405

[José Rigoberto Barocio]

Hello, this is my configuration...

2-RP5405
1-DiskSystem2300 with 6 disk's(73GB)
2-PCI 4si SCSI controler on each RP5405

In the DiskSystem i have one raid level 5 with the 6 disk's.

The disksystem is connected to one RP, but i want to connect de other RP to the disksystem to see the same information(raid), it's posible?? so when one RP fail then the other RP see the same information.

thanks!!!

[RAC_1 · Accepted solution]

Yes. you will have to add scsi controllers and then connect them to other system. Make sure that you use different scsi id when doing this.

When one systems goes down or develop problems, you can imort those disk onto other system. (For this define the vg on both systems as sharable)

[José Rigoberto Barocio]

Thanks!!!
But is posible to see the same information with the 2 rp up?.. so a want to share the volume group (raid5) with the other rp.

[José Rigoberto Barocio]

done