Operating System - HP-UX
1837069 Members
2569 Online
110111 Solutions
New Discussion

DiskSystem 2300 and RP5405

 
SOLVED
Go to solution
José Rigoberto Barocio
Occasional Contributor

DiskSystem 2300 and RP5405

Hello, this is my configuration...

2-RP5405
1-DiskSystem2300 with 6 disk's(73GB)
2-PCI 4si SCSI controler on each RP5405

In the DiskSystem i have one raid level 5 with the 6 disk's.

The disksystem is connected to one RP, but i want to connect de other RP to the disksystem to see the same information(raid), it's posible?? so when one RP fail then the other RP see the same information.

thanks!!!
3 REPLIES 3
RAC_1
Honored Contributor
Solution

Re: DiskSystem 2300 and RP5405

Yes. you will have to add scsi controllers and then connect them to other system. Make sure that you use different scsi id when doing this.

When one systems goes down or develop problems, you can imort those disk onto other system. (For this define the vg on both systems as sharable)
There is no substitute to HARDWORK
José Rigoberto Barocio
Occasional Contributor

Re: DiskSystem 2300 and RP5405

Thanks!!!
But is posible to see the same information with the 2 rp up?.. so a want to share the volume group (raid5) with the other rp.
José Rigoberto Barocio
Occasional Contributor

Re: DiskSystem 2300 and RP5405

done