DLT7000

[Rebecca Hounschell]

I installed SureStore 718 DLT autoloader on a B2000 workstation. The device is claimed when looking in ioscan but there aren't any device files. Stape drive is loaded. Are there specific drivers that I need to load for the device files to be created?

[Domenico_5 · Accepted solution]

hi rebecca

if you can't see the special file, you can run insf -e and then with ioscan -fnCtapa you can see it

[S.K. Chan]

Run ..

# insf -e

..to recreate missing device files and then ioscan it again, you should be able to see it then.

[pap]

Hi,
You need to run
#insf -e

you are all set then.
-pap

[Francois Bariselle_3]

Hi,

It's easy rebecca!

Same solution that Domenico Vizzoca, S.K. Chan and Pap...

Run insf -e to crate all missing device file.

For more information, see man page about insf and all options.

Good luck.
Frank.

[MANOJ SRIVASTAVA]

Hi Rebecca

This can also be tried . Just do a insf w/o a -e option and it will install files for the devices which are new and not go through the whole installation.


Manoj Srivastava