Enabling Subnet 0 (Zero) in HPUX 11.00

[vselvaraj]

Dear All,

In our Network We could not configure the
Lan Card of HP 9000 Server in the First Subnet,
It is not accepting the Subnet mask,

Can anyone know how to enable "SUBNET ZERO"
in HP Servers as this problem can be resolved by this itseems.

Thanks in Advance,
Selva...

[Berlene Herren · Accepted solution]

ndd -set /dev/ip ip_check_subnet_addr 0
There is a file, /etc/rc.config.d/nddconf that you can put this command in:
TRANSPORT_NAME[0]=ip
NDD_NAME[0]=ip_check_subnet_addr
NDD_VALUE[0]=0

This will keep the value after a reboot.

Also see post
http://forums.itrc.hp.com/cm/QuestionAnswer/1,1150,0x9bdcf841489fd4118fef0090279cd0f9,00.html

Berlene