Error Message

[Mohammad Sanaullah]

Dear All i have got the follwing error in EMS Event Notification
Value: "MAJORWARNING (3)" for Resource: "/storage/events/disk_arrays/MSA1000/0_4_1_0_4_0.1.0.255.0.0.
0" (Threshold: >= " 3") Execute the following command to obtain event details:
/opt/resmon/bin/resdata -R 159907842 -r /storage/events/disk_arrays/MSA1000/0_4_1_0_4_0
.1.0.255.0.0.0 -n 159907841 -a


and i have run the same command and got following O/P

$ torage/events/disk_arrays/MSA1000/0_4_1_0_4_0.1.0.255.0.0.0 -n 159907841 -a <

CURRENT MONITOR DATA:

Event Time..........: Mon Oct 15 06:49:31 2007
Severity............: MAJORWARNING
Monitor.............: msamon
Event #.............: 301
System..............: rebar01.tatasteel.com

Summary:
Disk Array at hardware path 0/4/1/0/4/0.1.0.255.0.0.0 : Component State
changes


Description of Error:

Temperature Warning Level Reached. Internal Temperature at slot 0 is nearing
the preset temperature limit.

Probable Cause / Recommended Action:

Temperature Warning Level Reached. Check the airflow, room temperature, and
fans in and around the Device.

Additional Event Data:
System IP Address...: 143.0.143.3
Event Id............: 0x4712c02300000000
Monitor Version.....: B.01.00
Event Class.........: I/O
Client Configuration File...........:
/var/stm/config/tools/monitor/default_msamon.clcfg
Client Configuration File Version...: A.01.01
Qualification criteria met.
Number of events..: 1
Associated OS error log entry id(s):
None
Additional System Data:
System Model Number.............: ia64 hp server rx2600
EMS Version.....................: A.04.10
STM Version.....................: C.46.00
Latest information on this event:
http://docs.hp.com/hpux/content/hardware/ems/msamon.htm#301

v-v-v-v-v-v-v-v-v-v-v-v-v D E T A I L S v-v-v-v-v-v-v-v-v-v-v-v-v



Component Data:
Firmware Version.......: 4.32
Serial Number..........: P56350GX3QT0A4
Inquiry Product ID.....: MSA1000
Inquiry Vendor ID......: COMPAQ

Product/Device Identification Information:

Logger ID.........: sctl
Product Identifier: ARRAY
Product Qualifier.: COMPAQ MSA1000
SCSI Target ID....: 0x00
SCSI LUN..........: 0x00


How can i have the threshold temparature??? Please let me know if there is any command to know the same as i have to tell the customer that servers should be kept between this temparature limit.

Thanks in Advance

[Duncan Edmonstone]

Temperature thresholds are in the manual:

http://h20000.www2.hp.com/bc/docs/support/SupportManual/c00800933/c00800933.pdf

See p38

These are usually temepartures measured coming *in* to the unit, rather than leaving it.

HTH

Duncan

[Andrew Merritt_2]

Hi Mohammad,
Although it has no direct bearing on whether you get the error or not, you should also consider upgrading your OnlineDiags. You have version C.46.00 (September 2004), whereas the current version is C.56.00 (June 2007). HP only supports the current and previous releases of the OnlineDiags.

Andrew