Operating System - HP-UX
1820667 Members
2302 Online
109626 Solutions
New Discussion юеВ

Error on CDE display - Reflection X

 

Error on CDE display - Reflection X

Hi Guru,

Need some help, after i configured dns client ( using set_parms addl_netwrk ). I can't relogin back to the server via Reflection X software. The details error prompt up from the screen while accesing the server ;

The desktop messaging system could not started

To correct the problem

1 ) Choose [OK] to return to the login.
!2 ) Select failsafe session from the login screen's option menu and login
3 ) Check to see that the desktop is properly installed, the hostname is correct ( /etc/hosts ) and that the network is properly configured.

For additional information, see the CDE User Guide.

Info:
a ) Server Rp4440 - HPUX 11.11
b ) 4 Server - 2 Svr OK 2 Svr KO
c ) Is it any CDE file related to this matter that i need to modify ?
d ) Do try to disable the DNS Setting ( via /etc/resolv.conf )and relogin back,is OK no problem with the above msg.

Please help ... TQ

Rgrds
Zuls
5 REPLIES 5
Alan Meyer_4
Respected Contributor

Re: Error on CDE display - Reflection X

does the DNS resolve the address of the machine where you are running reflection from OK?
" I may not be certified, but I am certifiable... "

Re: Error on CDE display - Reflection X

Yes. The DNS already resolve the address of the machine. Since i have 4 Svr HPUX 11.11 and 2 HPUX Server is ok but the other 2 having the above error.

Rgrds -> Zuls
Juan M Leon
Trusted Contributor

Re: Error on CDE display - Reflection X

I believe you can try login in failsafe session. If you are successful then you can logout and login in normal mode without problems.
Or you can enter the name and IP number in your /etc/hosts.
The problem I experienced using my server connected to the internet is that the CDE login screen will appear and after I entered the Id and password it will appear like it is loggin in and then it will return to the login screen without any errors.
To resolve my problem I entered the WAN IP address and the WAN name in the /etc/hosts. Since then I did not have any problems login with Exceed

I hope it helps.

Re: Error on CDE display - Reflection X

Hi,

I do solve this case.

Actually i mistakenly configure the nsswitch.conf

Anyway thanks for the reply.

Rgrds,
Zuls

Re: Error on CDE display - Reflection X

Thanks everyone