Firmware upgarde of HBA(A6826A)

[Shehan]

Hi Support
I have rp4440/800/9000 server ,running hp-ux 11.11 v1.In the server ,there are two HBA cards(A6826A). As we are going to upgrade HBA card firmware, can we use "fcmsutil" command on the OS.

Thanks
Nirukshitha

[Torsten.]

If you don't boot via this card, it is enough to have the driver up-tp-date, see

http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=331475&prodTypeId=329290&prodSeriesId=331473&swLang=13&taskId=135&swEnvOID=7

If you boot over this card, you may consider to upgrade the RISC firmware using fcmsutil:

http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=331475&prodTypeId=329290&prodSeriesId=331473&swLang=13&taskId=135&swEnvOID=54

[Torsten.]

Please read this too:

http://forums1.itrc.hp.com/service/forums/helptips.do?#33

[Shehan]

Hi

I downloaded firmware from the RISC Firmware from the given link.It has to be run on the EFI partition.But there is no EFI shell in the rp4440 server. Will I be able to run on HP-UX OS using flowing command?

"fcmsutil /dev/fcd0 rom_fw_update ql2312fw.bin"

Thanks
Nirukshitha

[Hasan Atasoy]

hi ;
after downloading FibrChanl-01_B.11.11.13_HP-UX_B.11.11_64.depot ; put it on /tmp and install by
swinstall -s /tmp/FibrChanl-01_B.11.11.13_HP-UX_B.11.11_64.depot

[Shehan]

Dear Hasan

This is driver upgrade of the HBA card. But I need the firmware upgrade command from the OS.

Thanks
Nirukshitha