1834736 Members
3102 Online
110070 Solutions
New Discussion

Re: Gbit after ignite

 
Donald Kok
Respected Contributor

Gbit after ignite

Hi there,

From an ignitetape (ux 11.0)I installed a new machine. This new machine has gigabit ethernetcards and fibrecards:

gbit: A6825-60101
fibre: Tachyon XL2 Fibre

Can you tell me how to get these things to work?

TIA
My systems are 100% Murphy Compliant. Guaranteed!!!
6 REPLIES 6
Ian Dennison_1
Honored Contributor

Re: Gbit after ignite

Mount the Application CD # 1 for 11.0 that you have.

Inside this CD will be a Table of Contents file

ll /cdrom |grep -i content
OR
ll /cdrom |grep -i table

'vi' this file, and look for the Product Number A6825, then scroll back to find out which Application CD it is on.

Load this Application CD, and install the Drivers for A6825 using 'swinstall'.

Share and Enjoy! Ian
Building a dumber user
Cheryl Griffin
Honored Contributor

Re: Gbit after ignite

You need to load the appropriate software, patches, and drivers into the kernel.

Gbit: igelan product A6825A is on the application disk. The card will bind to the driver igelan and you'll configure /etc/rc.config.d/hpigelanconf
It requires the latest HP-UX 11.0 Quality Pack and patches PHNE_26250 and PHCO_25902. These patches have dependencies:
PHCO_25902
PHCO_26017
PHNE_21767
PHNE_22566
PHNE_26250


Fibre:
Download A6795A version: B.11.00.10 from
http://www.software.hp.com/cgi-bin/swdepot_parser.cgi/cgi/displayProductInfo.pl?productNumber=A6795A Order of install is very important. So use the installation instructions from http://www.software.hp.com/cgi-bin/swdepot_parser.cgi/cgi/displayProductInfo.pl?productNumber=A6795A&oper=install. This patch also lists a required patch PHKL_23939. It has the following dependencies:
PHCO_21187
PHCO_23651
PHKL_17038
PHKL_18543
PHKL_20016
PHKL_23939
PHKL_27813
PHKL_27980

Cheryl
"Downtime is a Crime."
Donald Kok
Respected Contributor

Re: Gbit after ignite

thanks sheryl,

unfortunately both links are not fully OK:
- Could not open file /var/opt/ns-enterprise/docs/
- download button produces a [not found]

Thanks
My systems are 100% Murphy Compliant. Guaranteed!!!
Cheryl Griffin
Honored Contributor

Re: Gbit after ignite

Exactly where are you getting these messages? I just attempted to download A6795A and access the instructions and was successful.

I also checked the 11.00 (Server) application disk. The lan software is on disk 1 of 1, CD Part Number - 5012-1969

CPL Product: A6825A
Codeword Req.: No
Size: 848524
Description: 1000Base-T PCI Gigabit Ethernet Driver

"Downtime is a Crime."
Donald Kok
Respected Contributor

Re: Gbit after ignite

I followed you first link, and clicked on (re)download : Could not connect to remote server.
My systems are 100% Murphy Compliant. Guaranteed!!!
Michael Steele_2
Honored Contributor

Re: Gbit after ignite

Donald

Go to maintenance and support and observe this bullet: (* I think *)

- navigate knowledge trees and response center FAQ's

Is there a "key" at the end?

This indicates a qualified system handle needs to be linked to your account.
Support Fatherhood - Stop Family Law