GSP??

[Mohan Chennasamudram]

Hello,

Need help to use GSP.. pl. let me know ( I need to use this to erase some alert log which blinks the alert light on the server )

Thanks in Adv

[Stefan Farrelly · Accepted solution]

You can enter the GSP (Guardian Service Processor) through .
Once there you will be asked for a login and password (Those most likely are not
set - just hit ). From there you can type 'he' to show available
commands. 'sl' will show you the service logs, just view the service logs and the attention light should go out.

[Patrick Wessel]

There is no way to delete error logs. If you want to switch of the attention light, you have just to read the logs.
1) type ^B (ctrl-B) at the console to get the GSP> Prompt
2) type sl for 'show logs'
3) select e for 'error logs'
4) no Filter!
5) take a look at the current logs (lowest numbers)

[Alex Glennie]

I agree with Patrick ...
there will be no command to clear out the GSP logs until a later GSP product codenamed Maestro - sometime this year. Then it will require another GSP
interface card for both the L and N class systems.

[Anthony Goonetilleke]

You can get more info on the GSP from the hardware manuals. ie for the L-Class have a look at

http://docs.hp.com/omnimark/lclass/book1.html

Go to the index and have a look under G