Guardian Service Processor on RP5470 Problem

[CJENSEN_1]

I can log into it using the username/password. I get the standard message "Hewlett Packard Guardian Service Processor...", but cannot get past that. IE - ctrl B or Ctrl Ecf does not work. It does not respond to anything.

[Steven E. Protter · Accepted solution]

You need to reset your GSP

#!/usr/bin/sh

stty +resetGSP
SEP

[CJENSEN_1]

Hello Steven,

That worked! I assigned points. Can I trouble you for a bit of an explanation as to exactly what that script does?

Thanks.

[Steven E. Protter]

As far as i know it sends a signal to the device driver for the GSP which the GSP is programmed to act as a soft or hard reset.

I believe you could direct the command at other devices, but i don't recommend you experiment on a system you care about.

Perhaps the better answer is: I am uncertain how it works, but it does and is quite useful when the GSP gets hung.

SEP

[Hoang Chi Cong_1]

Hi
I have some RP5470 server and had the same trouble...
HP recommend reset GSP to solve the problem and it works now.
You need to shutdown the server and then open the cover side, then push the GSP reset button (you can see it from the GSP card).
Anyway, take a look with these threads:
http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=616124
http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=149051
Goodluck!
Regard,
HoangChiCong

[Hoang Chi Cong_1]

And here is a helpfull link:
http://web.tampabay.rr.com/batcave/HELP_ON_ADMIN

Hope this helps
Regard,
HoangChiCong