Help me install an HP-UX 11.11 from scratch

[Radu DIT]

I'm new in UNIX world so I need all the help I've could get.
I have to install from scratch HP-UX 11.11 on a machine with this configuration:
Model: 9000/800/N4000-44
Main Memory 2048 Mb
Processors: 2
OS Mode: 64 bit
LAN Hardware: 0x001083FA7595
LAN Hardware: 0x001083CEFF79
HP DVD-ROM 304 0/0/1/0.1.0 SCSI C896 Fast Wide Single-Ended
Seagate ST39102LC 8683Mb 0/0/2/1.6.0 SCSI C875 Ultra Wide Single-Ended
Seagate ST39102LC 8683Mb 0/0/2/0.6.0 SCSI C875 Ultra Wide Single-Ended

[Sanjiv Sharma_1]

Hi Radu,

Please check this link:
http://docs.hp.com/hpux/onlinedocs/5187-2239/5187-2239.html

hth.

[Sanjay Kumar Suri]

I will recommend reading a installation guide from

http://docs.hp.com

sks

[Sanjay_6]

Hi,

Try these,

http://docs.hp.com/hpux/os/11i/index.html#Installing%20and%20Updating

Hope this helps.

Regds

[Richard Saldivar]

The book by Mary Poniatowski "HP-UX 11i.x System Adminstration" is my favorite book.
It goes thru turning on the machine booting from the CDs and installing. Each step is very detailed. Once installed the book goes into installing software, adding users, printers, and anything else you would want.

[Doug Burton]

After reading the good stuff posted above you may want to look here:
http://web.tampabay.rr.com/batcave/ServerBuilds.htm

Please note that it's pretty generic. You'll need to fill in the blanks, use/not use some of it, etc. etc.....