HPE Community
Operating System - HP-UX
1837256 Members
2549 Online
110115 Solutions
New Discussion

Re: How check the quorum setting ?

 
Jdamian
Respected Contributor

‎10-04-2004 05:57 AM

‎10-04-2004 05:57 AM

How check the quorum setting ?

State an active VG, how can I check if it was activated using either "vgchange -q n" or "vgchange -q y" ? ...

vgdisplay doesn't show that info.

Thanx in advance.
0 Kudos
Reply
3 REPLIES 3
Geoff Wild
Honored Contributor

‎10-04-2004 06:10 AM

‎10-04-2004 06:10 AM

Re: How check the quorum setting ?

Well...the default is yes....

You would have to do it manually for no, or have a custom setting in /etc/lvmrc

Rgds...Geoff
Proverbs 3:5,6 Trust in the Lord with all your heart and lean not on your own understanding; in all your ways acknowledge him, and he will make all your paths straight.
0 Kudos
Reply
G. Vrijhoeven
Honored Contributor

‎10-04-2004 06:35 AM

‎10-04-2004 06:35 AM

Re: How check the quorum setting ?

Hi Oscar,

Geoff is right that is defaults to y but we always setup the alternate disk with -lq option. If you are on a isl the hpux command allows you to change these settings. check
http://docs.hp.com/cgi-bin/onlinedocs.py?mpn=B2355-60103&service=hpux&path=00/06/659&title=HP-UX%20Reference%20%2811i%20v2%2003/08%29

But to give you an answer, i do not think it is possible to view how it was acivated.

Regards,

Gideon
0 Kudos
Reply
Doug Burton
Respected Contributor

‎10-04-2004 06:47 AM

‎10-04-2004 06:47 AM

Re: How check the quorum setting ?

You can change the settings by running this:

mkboot -a "hpux -lq (;0)/stand/vmunix" /dev/rdsk/c1t2d0

and checking the settings with this:

lifcp /dev/rdsk/c1t2d0:AUTO -

Of coarse change the numbers if you need to.
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.