Operating System - HP-UX
1827702 Members
2979 Online
109967 Solutions
New Discussion

how do you distingish between connection types?

 
J. de Haan
Occasional Advisor

how do you distingish between connection types?

 
2 REPLIES 2
sven verhaegen
Respected Contributor

Re: how do you distingish between connection types?

could you please explain a bit on this question , what type of connections are you talking about what do you want it for , what kind of output do you excpect , is this the protocol type being TCP or UDP or something else because netstat -a would tell you this or is it the type of hardware connections you are talkig about 10baseT , 100Bt , GigaBit , AUI , BNC , RJ45 etc .... these are harder to see , lanadmin will show the card type as will normally ioscan , for the connector type AUI , BNC , RJ45 that is more difficult , perhaps with SNMP like requests you could get the system information ont he card to derive this ... beren to long out of the OV NNM part to stillr emember if there was a subset in the snmpv1 and v2 that defines also the port types on the lancard but I think so...
...knowing one ignores a greath many things is the first step to wisdom...
J. de Haan
Occasional Advisor

Re: how do you distingish between connection types?

Sorry, was a bit to fast with [Enter]. Second message is more elaborate.

Jan.