HPE Community
Operating System - HP-UX
1832616 Members
3191 Online
110043 Solutions
New Discussion

Re: how to add on the 10/100 ethernet module (a3738a) onto the visualize c160 workstation

 
vacharapan mongkalee
New Member

‎09-19-2004 04:43 AM

‎09-19-2004 04:43 AM

how to add on the 10/100 ethernet module (a3738a) onto the visualize c160 workstation

Once I added on the a3738a module, I found there is an ethernet module added on but the description - from ioscan's output - shows "?" and, of course it is unclaimed.

WHERE DO I CAN HAVE ITS DRIVER TO USE ON THE Visualize c160
0 Kudos
Reply
5 REPLIES 5
Sridhar Bhaskarla
Honored Contributor

‎09-19-2004 04:51 AM

‎09-19-2004 04:51 AM

Re: how to add on the 10/100 ethernet module (a3738a) onto the visualize c160 workstation

Hi,

You will need to install the driver for it. I would look at the latest Application CD - 1 for drivers.

-Sri
You may be disappointed if you fail, but you are doomed if you don't try
0 Kudos
Reply
vacharapan mongkalee
New Member

‎09-19-2004 04:59 AM

‎09-19-2004 04:59 AM

Re: how to add on the 10/100 ethernet module (a3738a) onto the visualize c160 workstation

Sorry, let me correct this question...
"WHERE CAN I HAVE ITS DRIVER TO USE ON THE Visualize c160"
And additional information is, this system runs the HPux11i.
0 Kudos
Reply
vacharapan mongkalee
New Member

‎09-19-2004 05:20 AM

‎09-19-2004 05:20 AM

Re: how to add on the 10/100 ethernet module (a3738a) onto the visualize c160 workstation

Dear Sridhar Bhaskarla,

I have not have any CD with this system...I tried to have lots of browsing itrc dowload page, but i have no idea to take which one.

Thanks for your reply, VaM.
0 Kudos
Reply
Sridhar Bhaskarla
Honored Contributor

‎09-19-2004 05:35 AM

‎09-19-2004 05:35 AM

Re: how to add on the 10/100 ethernet module (a3738a) onto the visualize c160 workstation

Hi,

I don't think I have a good news. This card was discontinued since Feb 2002. So, I am afraid you are going to find any site where you can download the driver. You may probably find it on the application CDs prior to March 2002 release. You may have to contact HP. Or some forum members may be able to upload the driver if they have the old CDs.

-Sri

You may be disappointed if you fail, but you are doomed if you don't try
0 Kudos
Reply
vacharapan mongkalee
New Member

‎09-19-2004 03:37 PM

‎09-19-2004 03:37 PM

Re: how to add on the 10/100 ethernet module (a3738a) onto the visualize c160 workstation

Dear Sridhar Bhaskarla,
Thanks for your kind, I will try to find the mentioned CDs.

rgds, Vacharapan Mongkalee
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.