How to check RAM size on HPUX 11 box

[Pinkal]

Box Detail as under

HP-UX kautilya B.11.11 U 9000/800 (tj)

model:9000/800/A500-7X

[Devender Khatana · Accepted solution]

Hi,

#dmesg |grep Physical

HTH,
Devender

[Yogeeraj_1]

hi,

try
echo "selclass qualifier memory;info;wait;infolog"|cstm

regards
yogeeraj

[Tim Nelson]

dmesg

look at Memory section

Memory Information:
physical page size = 4096 bytes, logical page size = 4096 bytes
Physical: 3145728 Kbytes, lockable: 2426332 Kbytes, available: 2790624 Kbytes

[Mel Burslan]

echo phys_mem_pages/D | adb -k /stand/vmunix /dev/mem | awk '{print 4096*$2}'

this should give you the amount of physical memory you have on the system.

HTH

[Devesh Pant_1]

Pinkal,
as if all the solutions above were not enough.
Still I will tell you one more way to get the memory size:
Fire up glance
/opt/perf/bin/glance
and press m
you will see all the details.
thanks
DP

[Fabio Ettore]

Hi,

try by mstm

select memory and then Tools ---> Information ---> Run

or

REAL_MEM=`echo 'phys_mem_pages/D '| adb -k /stand/vmunix /dev/kmem | tail -1 | awk '{ print $2/256}'`
echo $REAL_MEM

or also

dmesg | grep -i physical

HTH.

Best regards,
Fabio

[Pinkal]

Thanks a lot all of you.

I am able to find the RAM.

Can any one know How to find CPU speed on same machine.

[Joseph Loo]

hi,

another method is thru SAM:

sam -> Performance Monitor -> System Properties -> Memory tab

regards.
(p.s. please remember to assign points.)

[Thayanidhi]

Hi,

echo itick_per_usec/D | adb -k /stand/vmunix /dev/kmem

Will give the speed in Mhz.

Regds
TT

[Joseph Loo]

sam -> Performance Monitor -> System Properties -> Processor tab

regards.

[Pinkal]

Thanks a lot guys ...

[Fabio Ettore]

Hi Pinkal,

if people helped you don't forget to assign points...it is an etiquette on this forum.

No points please for this my post....

Thanks for your collaboration.

Best regards,
Fabio

[Geoff Wild]

I know this is late - but here's a script called hpmem - output like:

# /usr/local/bin/hpmem
HP-UX pc0003 B.11.11 U 9000/800 2504392627 unlimited-user license
CPU Count: 6
CPU Speed: 750 MHz
CPU HW Support: 64-bit
Kernel Support: 64-bit
RAM Size: 10080 MB
bufpages: 705 MB
maxuprc: 800
maxvgs: 128
maxfiles: 2048
max_thread_proc: 256
nfile: 189100
nproc: 2560
ninode: 16384
shmmax: 1073741824
shmmni: 256
dbc_max_pct: 7



# cat /usr/local/bin/hpmem
#!/bin/ksh
#
# Taken from the HP/UniGraphics FAQ
# You must be ROOT to execute this since it uses adb to
# examine the running kernel
#
GetKernelSymbol()
{
echo "$1/D" | \
adb $hpux /dev/kmem | \
tr "\012" " " | \
read junk junk2 kval
}
hpux=/hp-ux
rev=$(uname -r | cut -d. -f2)
if ((rev > 9)); then hpux=/stand/vmunix ;fi
/bin/uname -a
# if 11iv2 or higher - get cpu this way
ver=$(uname -r | cut -d. -f3)
if ((ver > 22)); then
kval=`echo "processor_count/D" | adb /stand/vmunix /dev/kmem |tail -1|awk -F: '{print $2}' `
else
GetKernelSymbol "processor_count"
fi
print CPU Count: $kval
GetKernelSymbol "itick_per_tick"
let speed=kval/10000
print CPU Speed: $speed MHz
if ((rev > 10)); then
print CPU HW Support: `getconf HW_CPU_SUPP_BITS`-bit
print Kernel Support: `getconf KERNEL_BITS`-bit
GetKernelSymbol "memory_installed_in_machine"
else
GetKernelSymbol "physmem"
fi
# if 11iv2 or higher - get memory this way
ver=$(uname -r | cut -d. -f3)
if ((ver > 22)); then
kernel=$(/usr/sbin/kcpath -x)
hexval=$(echo "phys_mem_pages/A" | adb $kernel /dev/kmem|tail +2|awk '{print $2}')
REAL_MEM=$(echo ${hexval}=D|adb)
mb=$(expr ${REAL_MEM} / 256)
else
let mb=kval*4/1024 # convert pages to MB
fi
print RAM Size: $mb MB
GetKernelSymbol "bufpages"
let mb=kval*4/1024 # convert pages to MB
print bufpages: $mb MB
GetKernelSymbol "maxuprc"
print maxuprc: $kval
GetKernelSymbol "maxvgs"
print maxvgs: $kval
GetKernelSymbol "maxfiles"
print maxfiles: $kval
GetKernelSymbol "max_thread_proc"
print max_thread_proc: $kval
GetKernelSymbol "nfile"
print nfile: $kval
GetKernelSymbol "nproc"
print nproc: $kval
GetKernelSymbol "ninode"
print ninode: $kval
GetKernelSymbol "vfd_cw"
print shmmax: $kval
GetKernelSymbol "shmmni"
print shmmni: $kval
GetKernelSymbol "dbc_max_pct"
print dbc_max_pct: $kval


Rgds...Geoff

[Ranveer]

hi pinkal
run the attached script and find the detail.
#./ranveer
Regds
Ranveer

[Muthukumar_5]

Check this for all resources.
http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=706790

hth.

[Ricardo Macedo]

May God bless you in everyway!

What shall I return to the Lord for all his goodness to me?

I will lift up the cup of salvation and call on the name of the Lord.

Psalm 116:12-13

[sapoguheman]

machinfo shows it all :P

[vit_foto]

machinfo   is OK