How to find Cylinders/Sectors/Disk capacity

[Sea Monkey]

Hi All,

How to find out no of Cylinders/Sectors and Disk capacity for a particular disk ? In Linux, we have fdisk -l .. Will diskinfo be helpful ? It displays only blocks per disk and size.

Cheers

[Torsten.]

To know something about cylinders/sectors won't be helpful. The command

diskinfo -v /dev/rdsk/cxtydz

will give you the size of the disk.

[Devender Khatana]

Hi,

In HPUx only size is what matters and configuration based on sectors and cylinders is not required.

#diskinfo -v /dev/rdsk/cxtydz

will give the details.

HTH,
Devender

[Sea Monkey]

Thanks for your quick replies. I would like to know no of Cylinders/Sectors, that is my requirement. I knew # diskinfo -v will help to some extent and looking for granular command.

Sea

[Cem Tugrul]

The diskinfo command determines whether the character special file
named by character_devicefile is associated with a SCSI or floppy disk
drive. If so, diskinfo summarizes the disk's characteristics.

The diskinfo command displays information about the following
characteristics of disk drives:

Vendor name Manufacturer of the drive (SCSI only)
Product ID Product identification number or ASCII name
Type floppy or SCSI classification for the device
Disk Size of disk specified in bytes
Sector Specified as bytes per sector

[Devender Khatana]

Hi,

Apart from OS if you let us know the model no. of the disk, we could get some further information about it.

Also I would really be interested to know the specific requirement in HPUx requireing such details.

HTH,
Devender

[Senthil Prabu.S_1]

Hi,
The system command "mediainit" will help you. This command is used to format. But, you can also use this to know the number of cylinders each slice have. For ex, select the hard disk, and list the slices available.



HTH,
Prabu.S

[Andrew Rutter]

hi,

Use diskinfo to get the actual model of disk and then refer this to the manufacturers web site and look at the technical specs of the disk.

there used to be a disk service manual available for download for the older disks which had all the specs in, search docs.hp.com only upto 9gb though.

or search for your model disk in the disktab entries in HPUX, this will give you more info, though not always exact as there are different entries for the same disks.

Andy

[Hein van den Heuvel]

>> Thanks for your quick replies. I would like to know no of Cylinders/Sectors, that is my requirement. I knew # diskinfo -v will help to some extent and looking for granular command.


Pick a number, any number.
The Cylinder/Track information is surpassed by technology.
It is no longer applicable, and the drives just fake a bunch of reasonable sounding numbers which have little or no relevance to the actual hardware and can no longer usefully be exploited (for performance or availabilty reasons).

Specifically, all modern (less than 15 years old :-) disk are 'zoned' with many more (2x) blocks on the outer zones than on the inner zones.

Please help us understand why you think you needtrack/cylinder info other then just to full some useless report.

To date a 'disk' just have total size and availability characteristics.
Unfortunately the availability characteristics (raid 0, 0+1, 5,...) are rarely reported.

Regards,
Hein.