1833780 Members
2390 Online
110063 Solutions
New Discussion

How to ignite hpux11.11

 
sahir_1
Frequent Advisor

How to ignite hpux11.11

Hi,

Could you please tell me how to boot through lan to ignite my server. Superdome SD64A. One npar need to be ignited.I am trying following command and getting some errors. please tell me whats wrong with this? Is there anything should I check in ignite server?? Any help is highly appreciated.

bo lan.90.152.48.117 install

BCH Directed LAN Path: 8/0/0/1/0.90.152.48.117


Do you wish to stop at the ISL prompt prior to booting? (y/n) >> y

Initializing boot Device.


Boot IO Dependent Code (IODC) Revision 2


IODC ENTRY_INIT failed. Error Status: -7

The IODC for this boot device was unable to provide text describing the failure.
IODC ENTRY_INIT[Return Messages] failed. Error Status: -2

0x0000 0000000000000000 0000000000000000 000000000000000f 00000000203c42a0
0x0004 0000000000000000 0000000000000000 0000000000000000 0000000000000000
0x0008 0000000000000000 0000000000000000 0000000000000000 0000000000000000
0x000c 0000000000000000 0000000000000000 0000000000000000 0000000000000000
0x0010 000000000000000b 0000000000000000 00000000000000ff 0000000000000000
0x0014 0000000000000000 0000000000000000 0000000000000000 0000000000000000
0x0018 0000000000000000 0000000000000000 00000000004a0720 00000000f3ffa029
0x001c 00000000f0670047 00000000022c2222 0000000000000000 0000000088880003

1 REPLY 1
vishnu.khandare
Respected Contributor

Re: How to ignite hpux11.11

Hi sahir,

To install the server from Ignite server,
u must take down the details as ip, sub netmask,gateway mach address of lan card enter this details in bootptab file of ignite server.

Details are as below
Add your client's entries to /etc/bootptab on the server. The following example is provided in /etc/bootptab :

ignite-defaults:\
ht=ethernet:\
hn:\
bf=/opt/ignite/boot/nbp.efi:\
bs=48
System-IPF:\
tc=ignite-defaults:\
ha=00d009000000:\
ip=190.40.101.22:\
sm=255.255.248.0:\
gw=190.1.48.1:\
ds=190.1.48.11

Where u want to install ignite
Halt the server at ISL go to shell
create the dbprofile save it.

Reboot and select the boot menu thru network.
This will start install from Ignite image from ignite server.

Below are good links will help u,
http://bizsupport2.austin.hp.com/bc/docs/support/SupportManual/c01942660/c01942660.pdf

Hope this solves ur query.
Don't forget to assign points.


Regards
Vishnu Khandare

You should deserve before U desire!!!!