How to install network card J3515A ?

[OLIVA_1]

Hi all,

On a D320 server which runs with HP-UX 10.20, I need to swap my current network card by another.
My curent network card is
# ioscan -fnClan
Class I H/W Path Driver S/W State H/W Type Description
===================================================================
lan 0 8/16/6 lan2 CLAIMED INTERFACE Built-in LAN
/dev/diag/lan0 /dev/ether0 /dev/lan0

My new network card is a J3515A, someone can help me to determine which software (driver) I have to install and where can I find it ?

Thanks,

[Bill McNAMARA_1]

Check out this link for the 10.20 driver.

http://www4.itrc.hp.com/service/cki/patchDocDisplay.do?patchId=PHNE_22216

But you _may_ (not saying it for certain) end up with the new card showing up as lan1... thus you'll have to either rename lan0 to lan1 or reconfigure lan1 to be the system lan. (set_parms)

Later,
Bill

[Paula J Frazer-Campbell · Accepted solution]

Hi

Try here:-

http://forums.itrc.hp.com/cm/QuestionAnswer/1,,0xd99de3ed7640d71190080090279cd0f9,00.html


Paula

[Leif Halvarsson_2]

Hi,
Check if the btlan software is installed on your system, if not you can find it on the HP-UX install CD.

[T G Manikandan]

check this link

http://forums.itrc.hp.com/cm/QuestionAnswer/1,,0xd99de3ed7640d71190080090279cd0f9,00.html