General

[Indrajit Bhagat]

How can we know that Our Hp - Unix server is itanium based or Hp9000 based ?

[DCE · Accepted solution]

What model is it?

rpxxxx = PA Risc
rxxxxx = Itanium

[Oviwan]

hey

the command 'machinfo' shows you a lot of infos.

Regards

[Indrajit Bhagat]

i have executed this command then what it will be
# uname -a
HP-UX lngapp1 B.11.11 U 9000/800 1198414695 unlimited-user license

[DCE]

type in the command

model

[Indrajit Bhagat]

# # model
# 9000/800/L3000-6x
then it is must be HP 9000 based (PA - RISC TEchnology)

[DCE]

correct - it is PA Risc

[Biswajit Tripathy]

"machinfo" does not work on PA.

Just run "uname -m". Itanium should say
"ia64".

- Biswajit

[Andrew Merritt_2]

> B.11.11

This is also a giveaway. IA systems do not run 11.11.

Andrew

[Torsten.]

Hi,

# model
# 9000/800/L3000-6x

9000 - HP9000 family (always PA-Risc)
800 - server
L3000-6x - L3000 model (aka 5470) with 650 MHz CPUs

on an Integrity (Itanium2) it looks like this:

# model
ia64 hp superdome server SD16B

[Yogesh-Puranik]

Hi Indrajit,

We have got plenty of answers from other to check whether your server is PA-RISC or Itanium.

1] Using model command.

There is one other command to differentiate PA RISC with Itanium.Below command only works on Itanium servers.

#machinfo

Regards,

Yogesh

[Torsten.]

I don't see a reason why to answer a 4 years old thread again, but

>> Below command only works on Itanium servers.

#machinfo



is simply wrong!!!



"machinfo" works on both, Itanium and RISC, if you run 11.31:


# machinfo -v
CPU info:
1 PA-RISC 8800 processor (800 MHz, 32 MB)
CPU version 4
2 logical processors (2 per socket)

Vendor identification: Hewlett-Packard
Processor version info: 0x0000000000000284
Processor capabilities: 0x00000000000000b2
FSTWS, FSTWX, FLDWS, FLDWX generate word tx to I/O space
Multimedia halfword shift-and-adds
Multimedia halfword adds and subtracts
Speculative data prefetch on loads of GR0
Instruction cache: 32 MB
Data cache: 32 MB

Memory: 4096 MB (4 GB)

Firmware info:
Firmware revision: 46.34
IPMI is supported on this system.
BMC firmware revision: 3.52

Platform info:
Model: "9000/800/rp3440 "
Machine ID number: abcdef12345678
Machine serial number: DE12345678

OS info:
Nodename: server2
Release: HP-UX B.11.31
Version: U (unlimited-user license)
Machine: 9000/800
ID Number: 12345678
vmunix _release_version:
_release_version: