HPE Community
Operating System - HP-UX
1843959 Members
2031 Online
110226 Solutions
New Discussion

Re: How to set/change NFS timeout

 
SOLVED
Go to solution
Suu Quan
Occasional Contributor

‎06-27-2000 04:08 PM

‎06-27-2000 04:08 PM

How to set/change NFS timeout

on hp-ux 11?

I've looked at the UDP options for "ndd", but found nothing.

follow up question: NFS on hpux was on top of UDP. Is it still ? or has it
switched to TCP?

tia
0 Kudos
Reply
3 REPLIES 3
Shyam Kishore
Frequent Advisor

‎06-28-2000 12:22 AM

‎06-28-2000 12:22 AM

Solution

Re: How to set/change NFS timeout

Hi,

In both 10.20 and 11.x NFS is still on UDP only.

regards.

-Shyam
Kids learn from masters, masters from mistakes.
Reply
Paul Hite
Trusted Contributor

‎06-28-2000 05:51 AM

‎06-28-2000 05:51 AM

Re: How to set/change NFS timeout

As for setting the timeouts, this is done on a filesystem by filesystem basis with the "timeo=n" option of mount_nfs and this is documented on the mount_nfs(1m) manpage. But you will probably want to put the option in /etc/fstab so it gets set at each reboot.
Reply
Jakes Louw
Trusted Contributor

‎08-01-2000 05:55 AM

‎08-01-2000 05:55 AM

Re: How to set/change NFS timeout

OK, so what is an acceptable value for timeo? The default is 7 tenths of a second.
Trying is the first step to failure - Homer Simpson
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.