How to set default access MP via SSL?

[natis]

How to set default access MP via SSL?

I use rp4440 and want to set default access MP via SSL.

Please, suggest me.

[Ivan Krastev]

See ILO Operations guide - http://docs.hp.com/en/5991-5984/index.html


You need following commands :

LM - License manager - to enable ssh license.
LC - Lan Configuration to setup ssh access

Both are under CM menu.

regards,
ivan

[Ivan Krastev]

Web SSL is enabled also via Administration WEB interface - http://docs.hp.com/en/5991-5984/ch06s04.html#v1695098


regards,
ivan

[Torsten.]

Check, if you have a license installed already:

MP:CM> lm


LM
License Management

Current MP License State:
License Type : Not activated

License activation key must be the following format:
XXXXX-XXXXX-XXXXX-XXXXX-XXXXX (where 'X' is a digit or a letter)

Enter License Activation Key or [Q] to quit:


If you see "Not activated" you need to purchase one and install.