HP 7420 Hardware Path Question

[KurtTJohnsonSr]

Please excuse my ignorance if the answer is obvious.
If I have the hardware paths listed from a UX prompt, 1/0/6/1/0, 1/0/14/1/0, 1/0/10/1/0/4/0, and 1/0/12/1/0/4/0, what would the actual hardware slot of each card be when viewing the server from the back?

[Torsten. · Accepted solution]

Try to answer this yourself:

# olrad -q

will show you the path together with the slot number.

[Torsten.]

Example:

Slot Path

0-0-0-1 0/0/8/1
0-0-0-2 0/0/10/1
0-0-0-3 0/0/12/1
0-0-0-4 0/0/14/1
0-0-0-5 0/0/6/1
0-0-0-6 0/0/4/1
0-0-0-7 0/0/2/1
0-0-0-8 0/0/1/1
0-0-1-1 1/0/8/1
0-0-1-2 1/0/10/1
0-0-1-3 1/0/12/1
0-0-1-4 1/0/14/1
0-0-1-5 1/0/6/1
0-0-1-6 1/0/4/1
0-0-1-7 1/0/2/1
0-0-1-8 1/0/1/1


Where slot is
Cabinet#-Bay#-Chassis#-Slot#

[KurtTJohnsonSr]

Passed this to the UX person here, and your advice is 100% accurate. Thanks!!

[Torsten.]

Welcome to the forums - have fun!

[Alastair Donaldson]

If yout running HP-UX i1.i V1 (11.11)then:
rad -q

If you are at 11.i V2 or V3 (11.23 / 11.31)
then the command is:
olrad -q