HPE Community
Operating System - HP-UX
1833236 Members
2869 Online
110051 Solutions
New Discussion

Re: HP Terminal Emulation and telnet

 
SOLVED
Go to solution
Robert Miller_4
Occasional Contributor

‎06-21-2004 03:52 AM

‎06-21-2004 03:52 AM

HP Terminal Emulation and telnet

Does there exist a free telnet executable for Windows that would emulate TERM=hp or TERM=70096?
0 Kudos
Reply
3 REPLIES 3
Sridhar Bhaskarla
Honored Contributor

‎06-21-2004 04:10 AM

‎06-21-2004 04:10 AM

Solution

Re: HP Terminal Emulation and telnet

Hi Robert,

QC Term is free and can emulate HP Term.

http://www.aics-research.com/qcterm/index.html

-Sri
You may be disappointed if you fail, but you are doomed if you don't try
Reply
Bharat Katkar
Honored Contributor

‎06-21-2004 07:51 AM

‎06-21-2004 07:51 AM

Re: HP Terminal Emulation and telnet

hi,
Well, the purpose can also be served by putting TERM=hp in /etc/profile.
Regards,
You need to know a lot to actually know how little you know
0 Kudos
Reply
Patrick Wallek
Honored Contributor

‎06-21-2004 07:57 AM

‎06-21-2004 07:57 AM

Re: HP Terminal Emulation and telnet

If the terminal emulator you are using doesn't know what an hp terminal is, then just setting TERM=hp is rather pointless.

I downloaded QCTerm earlier and it looks pretty good. My only wish for it would be for it to support SSH connections as well as telnet.

0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.