This widget could not be displayed.
Operating System - HP-UX
1845515 Members
2522 Online
110244 Solutions
This widget could not be displayed.
This widget could not be displayed.
This widget could not be displayed.
This widget could not be displayed.
This widget could not be displayed.
This widget could not be displayed.
This widget could not be displayed.
New Discussion
This widget could not be displayed.
This widget could not be displayed.

HP Terminal Emulation and telnet

 
SOLVED
Go to solution
Robert Miller_4
Occasional Contributor

HP Terminal Emulation and telnet

Does there exist a free telnet executable for Windows that would emulate TERM=hp or TERM=70096?
3 REPLIES 3
Sridhar Bhaskarla
Honored Contributor
Solution

Re: HP Terminal Emulation and telnet

Hi Robert,

QC Term is free and can emulate HP Term.

http://www.aics-research.com/qcterm/index.html

-Sri
You may be disappointed if you fail, but you are doomed if you don't try
Bharat Katkar
Honored Contributor

Re: HP Terminal Emulation and telnet

hi,
Well, the purpose can also be served by putting TERM=hp in /etc/profile.
Regards,
You need to know a lot to actually know how little you know
Patrick Wallek
Honored Contributor

Re: HP Terminal Emulation and telnet

If the terminal emulator you are using doesn't know what an hp terminal is, then just setting TERM=hp is rather pointless.

I downloaded QCTerm earlier and it looks pretty good. My only wish for it would be for it to support SSH connections as well as telnet.