HPE Community
Operating System - HP-UX
1836401 Members
2451 Online
110100 Solutions
New Discussion

Hp-us 10.20 and Raid5 partitions

 
Guettache
Advisor

‎09-27-2001 07:10 AM

‎09-27-2001 07:10 AM

Hp-us 10.20 and Raid5 partitions

Hi,
I have a 9000/D210 running HP-UX 10.20. We have
a Raid5 subsystem attached to it (/dev/dsk/c3t1d0). We have just added a new set of disks to the Raid5 as a new partition. This partition should appear to the host as a different disk drive. When I booted, ioscan did not detect this new partition.
Does someone knows why?
Thanks in advance

Narimane

0 Kudos
Reply
1 REPLY 1
Joseph C. Denman
Honored Contributor

‎09-27-2001 07:49 AM

‎09-27-2001 07:49 AM

Re: Hp-us 10.20 and Raid5 partitions

Hummm....

Sounds like you need to configure the subsystem. Did you create a new lun on the subsystem. It might help if you specified the type of subsystem it is.

...jcd...
If I had only read the instructions first??
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.