HPUX 11.23 support for A4800A FWD SCSI Adapter

[Sailesh_1]

Hi,

Anyone there knows if HPUX 11.23 supports the A4800A FWD Scsi card on a A500 PA Server?

If it supports, then any Driver software required to install?

Thanks for the help.

Regards,
Sailesh

[Robert-Jan Goossens · Accepted solution]

Hi Sailesh,

No not supported.

---

What's New in the Initial HP-UX 11i v2 Release?

The following summaries pertain to the initial HP-UX 11i v2 release (October 2003). For further information, see the indicated chapters in the initial HP-UX 11i Version 2 Release Notes , available in its most current version at http://www.docs.hp.com. The following is not an exhaustive list, so it strongly recommended that you consult the initial HP-UX 11i Version 2 Release Notes for information that is not included here.
Chapter 3: "Workstation/Server Specific Information"1

Mass Storage Drivers:

Fibre Channel Tachlite Driver: Updated to support interrupt migration and OLAR.
SCSI Drivers: Support limited to PCI cards. New cards A5149A and A5838A supported, with limitations. HVD cards A4800A, A5159A, and A5159B not supported. OLAR of A6828A and A6869A cards supported. Interrupt migration supported.

---

http://tinylink.com/?DULUuE0yeu

Regards,
Robert-Jan

[Michael Tully]

Unless something has changed recently an A500 only support 11.11 (11i version 1)

Now to your question, yes you can use a A4800A SCSI card in an A500.

[Robert-Jan Goossens]

Michael is right if you have a A500.

http://devrsrc1.external.hp.com/STK/serversupport.html

11.23 is not supported on a A500, if you install 11.11 the A4800A is supported.

Regards,
Robert-Jan

Thanks Michael :-)

[Sailesh_1]

Thanks Robert and Michael for the quick response with the information..Appreceiate that.

regards,
Sailesh