HPUX 11i V2 installation on RP 3410

[jaivinder]

ERROR: IO action QUERY_PROCESSOR failed: got
Hi Gurus,

I am trying to install the HPUX 11i V2 on one of my RP 3410 server.This server is currently running on HPUX 11i v1. While booting server with HPUX 11i v2 media I am getting following errors:

WARNING: Could not find Q_BOOT device. Cannot determine what the boot device
was.
WARNING: send_smapi_command: smapi_send_and_wait failed, got: CONFIG_SAVE
ERROR: Could not write disk information file
NOTE: System rebooting...
Shutdown at 12:04 (in 0 minutes)
System shutdown time has arrived

sync'ing disks (0 buffers to flush):
0 buffers not flushed
0 buffers still dirty

Closing open logical volumes...
Done

Thanks in advance.

[Mridul Shrivastava]

How you are trying to install the OS by ignite UX server/tape or by OS media (DVD/CD).

Have a look at the following threads, may give some idea to start with:

http://forums11.itrc.hp.com/service/forums/questionanswer.do?threadId=1227849

http://forums11.itrc.hp.com/service/forums/questionanswer.do?threadId=1152965

[Steven E. Protter]

Shalom,

This problem is most likely caused by not meeting the minimum firmware requirements of HP-UX 11.23 which are higher than the current OS of the server.

SEP

[jaivinder]

I had now tried to install using other HPUX 11i V2 media. Now it is running properly.


Thanks for your replies.