HPUX 11i

[Subbu Krishna]

Hello,

I just installed HPUX 11i on a L2000 server. The installation was successful. However, SAM seems to be extremley slow...... It takes several minutes to get he first screen. Has anyone seen this problem before ?.

Thanks - Subbu

[Ravi_8]

Hi,
u r machine seems to be one way, make it 2 way.

[Magdi KAMAL]

Hi Subbu,

Check if you don't have any network problems. Sam is specialy using the NFS to come up.

Use the ping command to see how much time you need to reach your default gateway.

Magdi

[Bill McNAMARA_1]

How is your swap space configured.
What is the swap activity at sam launch.
swapinfo

Later,
Bill

[harry d brown jr]

Are you using the console or telnet with the non-gui, or from a remote xsession using a gui?

[Chris Calabrese]

I have to go with Magdi KAMAL here and say it sounds like a network problem. Perhaps a DNS timeout issue. Make sure you can actually contact any DNS servers you've configured and also make sure you can resolve your own hostname (either through DNS or through /etc/hosts).