Operating System - HP-UX
1832907 Members
3761 Online
110048 Solutions
New Discussion

Hyperthreading in hp ux 11 i v2

 
Madhuchakaravar
Advisor

Hyperthreading in hp ux 11 i v2

Do HP-ux 11iv2 supports itanium hyper multithreading.

 

model rx 7640

 

Number of CPUs = 8

   Clock speed = 1418 MHz

   Bus speed   = 533 MT/s

   CPUID registers

      vendor information =       "GenuineIntel"

      processor serial number =  0x0000000000000000

      processor version info =   0x0000000020010104

         architecture revision:       0

         processor family:           32   Intel(R) Itanium 2 9100 series

         processor model:             1   Intel(R) Itanium 2 9100 series

 

regards

 

Madhu

1 REPLY 1
Dave Olker
Neighborhood Moderator

Re: Hyperthreading in hp ux 11 i v2

The rx7640 uses Itanium "Montecito" class processors.  Those CPUs do support hyperthreads but 11.23 does not support hyperthreads.  11.31 (11i v3) does support hyperthreads on that processor.

 

Dave



I work at HPE
HPE Support Center offers support for your HPE services and products when and how you need it. Get started with HPE Support Center today.
[Any personal opinions expressed are mine, and not official statements on behalf of Hewlett Packard Enterprise]
Accept or Kudo