Operating System - HP-UX
1847884 Members
4156 Online
104021 Solutions
New Discussion

Ignite issue....2 step media recovery...

 
boomer_2
Super Advisor

Ignite issue....2 step media recovery...

Hi guys,
why do i get this message alwayzz when tkng ignite backup......????

WARNING: You are about to create an Itanium-based recovery tape. If this
system does NOT support direct tape boot, you will need to perform
"two-step media recovery" where the boot media (CD or DVD) has the
same version of Ignite-UX as the version on this tape.
* Complete writing boot LIF onto tape.
* /opt/ignite/data/scripts/make_sys_image -c n -d /dev/rmt/2mn -t n -s
local -n 2008-07-03,13:05 -m t -w
/var/opt/ignite/recovery/2008-07-03,13:05/recovery.log -u -R -g
/var/opt/ignite/recovery/2008-07-03,13:05/flist -a 39356990


what can i do to avoid it in future..since evrytime i wont be looking for bootable DVD/CD.... ????
6 REPLIES 6
Torsten.
Acclaimed Contributor

Re: Ignite issue....2 step media recovery...

What server model do you have?

Some does not support boot from tape!

Consider to use LAN boot instead (ignite server based).

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Ramesh S
Esteemed Contributor

Re: Ignite issue....2 step media recovery...

Hi

Please go thru this link: http://docs.hp.com/en/5992-4825/5992-4825.pdf ( Page no:11 ). It will tell you native tape boot supported servers.

If you want to avoid using CD/DVD every time for booting, you could think for booting thru lan (booting from ignite server)

Best Regards
Ramesh S
boomer_2
Super Advisor

Re: Ignite issue....2 step media recovery...

Hi Torsten,
hpux 11i v2...8 gb ram..model rx6600.....

root #/ >swlist |grep -i ignite
IGNITE C.7.4.155 HP-UX Installation Utilities (Ignite-UX)
Ignite-UX-11-23 C.7.4.155 HP-UX Installation Utilities for Installing 11.23 Systems

Torsten.
Acclaimed Contributor

Re: Ignite issue....2 step media recovery...

Your system is able to boot directly from the tape - anyway, it takes a lot of time to boot from.

The warning is pretty normal, just in case.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Avinash20
Honored Contributor

Re: Ignite issue....2 step media recovery...

The Ignite backup version which you are having support directly tape boot.
The WARNING's were introduced since most of the server require minimum firmware for direct tape boot. Blade server always require two step boot process.
In your case, you are having rx6600
SCSI Tape Boot/Recovery (Minimum Required System Firmware) : ANY

Hence you could go for a directly boot from Tape. Hence you can ignore the errors.
"Light travels faster than sound. That's why some people appear bright until you hear them speak."
boomer_2
Super Advisor

Re: Ignite issue....2 step media recovery...

thanks guys,
i got my answer......