Ignite server config

[gany59]

Hi Techiees..

Can any body tell, how to configure the ignite server, i searched a lot in ITRC and i gone through so many links... Its not clearly visible to me.

So techiees, please share your knowledge on the ignite server configuration.


Thanks in advance for the valuable feedbacks.

[SoorajCleris]

Hi,

I am sorry , I am here giving a link to document. This will help you.

http://docs.hp.com/en/5992-6584/index.html

regards,
Sooraj

[Modris Bremze]

I think http://h20000.www2.hp.com/bizsupport/TechSupport/DocumentIndex.jsp?lang=en&cc=us&taskId=101&prodClassId=10008&contentType=SupportManual&docIndexId=64255&prodTypeId=18964&prodSeriesId=4077173 should cover everythinhg.

[gany59]

hello folks..

thanks for ur quick response.. but can any body explain the steps.. I would be very thankfull for the valuable replies....

[Tim Nelson]

what if you typed in "ignite" and then followed the prompts.

it will get you 90% of the way there...

CH3 in the ignite users guide pretty much gets you the basics (nothing compares to reading the doc)


once done, if you have some specific questions throw them back out here...

[rariasn]

Hi,

# export DISPLAY=xxxxxxx:0

# ignite &

--> Add new client
--> Select client
--> Create Network Recovery Archive
or
--> Create Tape Recovery Archive

rgs,