Ignite-UX problem

[Igor Sovin]

Hi!
I have a question about Ignite-UX product.
I have a configured host runing HP-UX 11i v.2 in my network. I have installed latest patch bundles and drivers on it. How can i distribute an image of this host to another hosts via Ignite-UX?
How to configure Ignite server to do that?
I know only one way - to put an image of host to hard drive on Ignite server an recover from server on local host, and I have to go to remote host and do that from it's console. But other hosts are in a different buildings. I want to distribute my configured HP-UX to remote hosts being only on Ignite server.
Is it possible to do that? If so, how to do it?

[G. Vrijhoeven · Accepted solution]

Hi,

An ignite server and a client do not have to be in the same subnet. You can confiure boot helpers.

Check the next link for info:

http://docs.hp.com/cgi-bin/fsearch/framedisplay?top=/hpux/onlinedocs/B2355-90772/B2355-90772_top.html&con=/hpux/onlinedocs/B2355-90772/00/00/79-con.html&toc=/hpux/onlinedocs/B2355-90772/00/00/79-toc.html&searchterms=helper%7cboot&queryid=20040504-031726

HTH,

Gideon

[Igor Sovin]

link that you've posted doesnt work :(

[G. Vrijhoeven]

HI Igor,

It works when i try it. Here is the link to the document:

http://docs.hp.com/hpux/onlinedocs/B2355-90772/B2355-90772.html

go to Using a Boot-Helper System section.

HTH,

Gideon

[Igor Sovin]

Thanx, my problem seems to be solved