Ignite-UX server/client Configurarion

[Nisar Ahmad]

Hi There

I have configured Ignite-UX server C.6.1.44 on a PA HP-UX 11.00 server and it worked for PA HP-UX 11.00 clints but not for rp34410 HP-UX 11i clints. When I tried to add clints for recovery it encounter a error like under:

"swinstall failed to install recovery tools from bordcu02:/var/opt/ignite/depots/recovery_cmds"

Thanks in advance fr you help

Regards

Nisar

[Ivan Krastev]

Can you post more from error log?

regards,
ivan

[Eric Antunes]

Hi Nisar,

The client and the server must have the same Ignite version: check that...

Best Regards,

Eric

[Chandan Kumar_1]

Hi Nisar,

Eric is correct...
Also check out...

http://docs.hp.com/en/B2355-90772/ch11s14.html

http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=1058493

Chandan K.

[Wyman Wong Man Wai]

Please check
# swlist |grep -i ignite
B5725AA C.6.10.97 HP-UX Installation Utilities (Ignite-UX)
Ignite-UX-11-00 C.6.10.97 HP-UX Installation Utilities for Installing 11.00 Systems
Ignite-UX-11-11 C.6.10.97 HP-UX Installation Utilities for Installing 11.11 Systems
Ignite-UX-11-23 C.6.10.97 HP-UX Installation Utilities for Installing 11.23 Systems

Do you have Ignite-UX-11-00 installed but not Ignite-UX-11-11? Without Ignite-UX-11-11, you cannot boot and install HP-UX 11.11 through Ignite-UX server.

Please use the same version for all Ignite-UX products in the same server. If you cannot get C.6.1.44 for Ignite-UX-11-11, you may need to remove C.6.1.44 and install lastest version of Ignite-UX.

[Nisar Ahmad]

Thanks ALL