HPE Community
Operating System - HP-UX
1844525 Members
3682 Online
110233 Solutions
New Discussion

Re: igniteing from different hardware class

 
joe clark
Advisor

‎04-16-2003 07:08 AM

‎04-16-2003 07:08 AM

igniteing from different hardware class

Has anyone used an ignite tape to go from a rp2470 to a N4000. I want to upgrade tp 11.i , without having to
change configuration files and install a lot of patches that are already on the 11i system. Thanks in advance.


0 Kudos
Reply
3 REPLIES 3
James R. Ferguson
Acclaimed Contributor

‎04-16-2003 07:15 AM

‎04-16-2003 07:15 AM

Re: igniteing from different hardware class

Hi Joe:

A far better, cleaner build would be to cold-install your N-class. I strongly advise doing it that way.

Regards!

...JRF...
0 Kudos
Reply
Stefan Farrelly
Honored Contributor

‎04-16-2003 07:19 AM

‎04-16-2003 07:19 AM

Re: igniteing from different hardware class

shoudlnt be a problem. Weve done lots of ignite 'installs' like this without any major problems.
Im from Palmerston North, New Zealand, but somehow ended up in London...
0 Kudos
Reply
Dario_1
Trusted Contributor

‎04-16-2003 07:26 AM

‎04-16-2003 07:26 AM

Re: igniteing from different hardware class

Joe:

As Stefan mentioned, you could do it that way but I will do a cold-install too.

Regards,

DR
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.