in the middle of make_tape_recovery...

[Stefan Farrelly · Accepted solution]

Your tape is full. It wants a 2nd tape to continue. Insert a 2nd tape and enter 'go' to continue. Basically your ignite image is too big to fit on a single tape. Its not a problem, we use multiple tapes for ignite images aok.

[Paula J Frazer-Campbell]

Hi

You seem to have a lot of:-

/dev/vg_stand01 etc, are these copies of stand? and if you why are you keeping them as the just take up space.

As previously said you need aqnother tape.

Paula

[Dario_1]

Hi!!

As mentioned before, the system is asking for a second tape. Just swap the tape and type go. You should be fine.

Regards,

DR

[Carlos Lopez_5]

Hi,
I`m looking for the driver for a Card J3515A for 10.20.
On the Cds the Applications, I don`t found it. You said long time ago that you have it, Can you please email it to me?