INIT: Command is respawning too rapidly.

[Oliver Tian]

I have been receiving the following message on the console all the time. Can any one tell you how to fix them? Thanks.

===================================
INIT: Command is respawning too rapidly.
Will try again in 5 minutes.
Check for possible errors.
id: h1 "/sbin/init.d/init.evmd run >/dev/null 2>&1
INIT: Command is respawning too rapidly.
Will try again in 5 minutes.
Check for possible errors.
id: h2 "/sbin/init.d/init.cssd fatal >/dev/null 2>&1
INIT: Command is respawning too rapidly.
Will try again in 5 minutes.
Check for possible errors.
id: h3 "/sbin/init.d/init.crsd run >/dev/null 2>&1
INIT: Command is respawning too rapidly.
Will try again in 5 minutes.
Check for possible errors.
id:Dial "/opt/sanmgr/hostagent/sbin/diald"

INIT: Command is respawning too rapidly.
Will try again in 5 minutes.
Check for possible errors.
id: h3 "/sbin/init.d/init.crsd run >/dev/null 2>&1
INIT: Command is respawning too rapidly.
Will try again in 5 minutes.
Check for possible errors.
id:Dial "/opt/sanmgr/hostagent/sbin/diald"

INIT: Command is respawning too rapidly.
Will try again in 5 minutes.
Check for possible errors.
id: h1 "/sbin/init.d/init.evmd run >/dev/null 2>&1
INIT: Command is respawning too rapidly.
Will try again in 5 minutes.
Check for possible errors.
id: h2 "/sbin/init.d/init.cssd fatal >/dev/null 2>&1 ======================================

[Steven E. Protter]

I'd say you are trying to use inittab to as a daemon.

Take the /etc/inittab entry out and try running the script as a daemon with a startup templte in /sbin/init.d

SEP

[Jeroen Peereboom]

L.S.

These lines in inittab means that init should execute the program mentioned and check that the program keeps on running.

Program files in /sbin/init.d however usually start a deamon, and end.

So remove the lines from inittab and have the scripts started at the correct runlevel by creating symbolic links in /etc/rc.d like Sevmd (and you may also need stop scripts (Kevmd)). You can start the scripts manually, but for a real test...reboot your system and check whether the deamons are running.

I don't know about /opt/sanmgr/hostagent/sbin/diald. You should try and run it manually and check what is is doing.

JP.