Operating System - HP-UX
1834152 Members
2302 Online
110064 Solutions
New Discussion

install serviceguard on two rp servers

 
service guard
New Member

install serviceguard on two rp servers

please give me the steps to install service guard on two rp3440 servers with msa1000
2 REPLIES 2
njia_1
Trusted Contributor

Re: install serviceguard on two rp servers

hi there,

Installing Service Guard software does not need msa1000.

All you need is SG depot, it is not free so you need coustomer id and codeword to be able to see in on CD. If you purchased MissionCritical HPUX 11i then it is on CD (not secured) already.

just a swinstall will install it for you.

Once you have SG installed on both of rp3440s then you need to configure shared VGs for packages, we need more information before providing a detailed step by step instructions.

thanks
Adisuria Wangsadinata_1
Honored Contributor

Re: install serviceguard on two rp servers

Hi,

FYI, ServiceGuard is not a free software, you need to purchase it to get a codeword before you use it.

Here is the good information regarding the serviceguard installation and configuration :

The detail about ServiceGuard on HP website :

http://h20293.www2.hp.com/portal/swdepot/displayProductInfo.do?productNumber=B3935DA

The url (docID : UXSGKBAN00000033) below about 'ServiceGuard Quick Reference' :

http://www2.itrc.hp.com/service/cki/search.do?category=c0&mode=id&searchCrit=allwords&docType=Security&docType=Patch&docType=EngineerNotes&docType=BugReports&docType=Hardware&docType=ReferenceMaterials&docType=ThirdParty&searchString=UXSGKBAN00000033

The url below (docID : UMCSGKBRC00010342) about 'ServiceGuard Cluster Implementation Summary' :

http://www2.itrc.hp.com/service/cki/search.do?category=c0&prevQueryString=KNC050897003&mode=id&searchString=umcsgkbrc00010342&searchCrit=allwords&docType=Security&docType=Patch&docType=EngineerNotes&docType=BugReports&docType=Hardware&docType=ReferenceMaterials&docType=ThirdParty&dateRange=all

For details information on ServiceGuard (the manuals) :

http://www.docs.hp.com/en/ha.html#Serviceguard

For MSA1000, you need to configure it first with the one that suitable with the MCSG. Check the url below :

http://h18006.www1.hp.com/products/storageworks/msa1000/index.html

Hope this information can help you.

Cheers,
AW
now working, next not working ... that's unix