installation in rp7420

[Sajjad Sahir]

ok
suppose i want to install in my rp7410(consider
it is a new one), I want to start to installation of hp-ux 11.23 version
I want step by step proceudre (brief)from 1st step onwards pls

to do this one
because i have to install here

[melvyn burnard]

read the manuals

There are various ones but the main one is here:
http://docs.hp.com/en/5992-1987/5992-1987.pdf
http://docs.hp.com/en/5992-1978/5992-1978.pdf

[Shrikant Lavhate]

Sajjad,

A quick and rough glance at boot process and starting installation:

Place media into drive and boot the system. Stop autoboot process by pressing any key when prompted at screen.
At boot console prompt you can fire HELP command to list all commands available at that prompt.
Here you can use sea command to search bootable media. It will list DVD installation media too which you have inserted in drive with its path eg.p0,p1 or p2 like.
Then boot with BOOT P0 command. where P0 is your dvd media number.
After a few minutes, at the Interact with IPL? prompt press n.
After this machine will boot from DVD media and will take you to the installation prompt.
Where it begins with asking you with lang or so.

This is very vage description to make it sound simpler but before to go with installation suggest you to got through above mentioned guides.

Best Luck.

[Sajjad Sahir]

ok ramesh
which cd I have to put in drive
I mean the exact name of the o/s cd( written
in cdrom)