1832990 Members
2463 Online
110048 Solutions
New Discussion

Installation of MirrorUX

 
vthiru
Advisor

Installation of MirrorUX

Hi,

I am trying to install MirrorDisk/UX(B2491BA) revision B.11.11 on HP-UX 11.11. I am getting the following error:


* Beginning Selection
* Target connection succeeded for "devserver1:/".
* Source connection succeeded for
"depotserver:/depots/MirrorDisk-UX/".
NOTE: The software "LVM" was successfully marked, but it depends on
the following software items which could not be found in the
source. However, these items may already be in the target.
This will be checked during the Analysis Phase:
LVM.LVM-RUN,r>=B.11.00.%23,a=HP-UX_B.11.00_32/64,fa=HP-UX_B.11.00_32/6
,v=HP

NOTE: The software specified contains a kernel fileset or a
dynamic_module fileset. The kernel will be modified, and if
necessary the system will be rebooted.
* Source:
"depotserver:/depots/MirrorDisk-UX/".
* Targets: devserver1:/
* Software selections:
B2491BA,r=B.11.00,a=HP-UX_B.11.00_32/64,v=HP
LVM.LVM-MIRROR-RUN,r=B.11.00,a=HP-UX_B.11.00_32/64,v=HP,fr=B.11.00
fa=HP-UX_B.11.00_32/64
* Selection succeeded.


* Beginning Analysis and Execution
* Session selections have been saved in the file
"/.sw/sessions/swinstall.last".
ERROR: "devserver1:/": 1 filesets have a version with a higher revision
number already installed.
* "devserver1:/": 1 bundles cannot be installed because none of
their filesets can be installed.
* The analysis phase failed for "devserver1:/".
* Analysis and Execution had errors.


ERROR: More information may be found in the agent logfile using the
command "swjob -a log devserver1-0083 @ devserver1:/".

Thanks in advance.

2 REPLIES 2
Patrick Wallek
Honored Contributor

Re: Installation of MirrorUX

It appears that you are attempting to install a version of MirrorDisk for HP-UX 11.0 on an HP-UX 11.11 machine. This WILL NOT work. You must get the version of MirrorDisk for HP-UX 11.11.

If you recently upgraded, or purchased MirrorDisk, or have a software support contract, then this should not cost you anything.
Andrew Rutter
Honored Contributor

Re: Installation of MirrorUX

hi,

Patricks right, you are using the wrong version apps cd. You need the 11.i version not 11.0 as your post.

* Software selections:
B2491BA,r=B.11.00,a=HP-UX_B.11.00_32/64,v=HP
LVM.LVM-MIRROR-RUN,r=B.11.00,a=HP-UX_B.11.00_32/64,v=HP,fr=B.11.00
fa=HP-UX_B.11.00_32/64

But you will need a new codeword for it aswell?

Andy