Operating System - HP-UX
1755721 Members
3398 Online
108837 Solutions
New Discussion юеВ

Installing Core OS from Ignite server vs. DVD

 
Norman Yamane
Occasional Advisor

Installing Core OS from Ignite server vs. DVD

Hello,

I've been testing an Ignite-UX profile where I start by installing HP-UX 11.11 from a depot source on the Ignite server. From the config file:

sw_source "core" {
description = "HP-UX Core Software"
source_format = SD
sd_server = "15.128.169.148"
sd_depot_dir = "/S800/test/"
source_type = "NET"
load_order = 0
}

and everything is fine. Now I want to develop a solution where I can use the DVD media (December 2003 MCOE DVD) instead of the copy I've placed on the server. So the config becomes:

sw_source "core" {
source_type = "DSK"
description = "HP-UX Core Software"
source_format = SD
sd_depot_dir = "/"
load_order = 0
change_media = true
source_path = "/dev/dsk/c3t2d0" # Added for testing... I expect to generate a boot CD later
}

with everything else staying exactly the same.

Now, when I install I get the following output:

* Installing fileset "OS-Core.CORE2-KRN,r=B.11.11" (5 of 801).
ERROR: Cannot open source file
"/tmp/ign_configure/SD_CDROM/OS-Core/CORE2-KRN.2/usr/conf/lib/libdlkm-pdk.a"
to copy it. No such file or directory (2).
ERROR: Cannot open source file
"/tmp/ign_configure/SD_CDROM/OS-Core/CORE2-KRN.2/usr/conf/lib/libfs-pdk.a"
to copy it. No such file or directory (2).
ERROR: Cannot open source file
"/tmp/ign_configure/SD_CDROM/OS-Core/CORE2-KRN.2/usr/conf/lib/libinit-pdk.a"
to copy it. No such file or directory (2).
ERROR: Cannot open source file
"/tmp/ign_configure/SD_CDROM/OS-Core/CORE2-KRN.2/usr/conf/lib/libio-pdk.a"
to copy it. No such file or directory (2).
ERROR: Cannot open source file
"/tmp/ign_configure/SD_CDROM/OS-Core/CORE2-KRN.2/usr/conf/lib/libkrs-pdk.a"
to copy it. No such file or directory (2).
ERROR: Cannot open source file
"/tmp/ign_configure/SD_CDROM/OS-Core/CORE2-KRN.2/usr/conf/lib/libperf-pdk.a"
to copy it. No such file or directory (2).
ERROR: Cannot open source file
"/tmp/ign_configure/SD_CDROM/OS-Core/CORE2-KRN.2/usr/conf/lib/libscall-pdk.a"
to copy it. No such file or directory (2).
ERROR: Cannot open source file
"/tmp/ign_configure/SD_CDROM/OS-Core/CORE2-KRN.2/usr/conf/lib/libsvc-pdk.a"
to copy it. No such file or directory (2).
ERROR: Cannot open source file
"/tmp/ign_configure/SD_CDROM/OS-Core/CORE2-KRN.2/usr/conf/lib/libutil-pdk.a"
to copy it. No such file or directory (2).
ERROR: Cannot open source file
"/tmp/ign_configure/SD_CDROM/OS-Core/CORE2-KRN.2/usr/conf/lib/libvm-pdk.a"
to copy it. No such file or directory (2).
ERROR: Cannot open source file
"/tmp/ign_configure/SD_CDROM/OS-Core/CORE2-KRN.2/usr/conf/lib/libwsio-pdk.a"
to copy it. No such file or directory (2).
ERROR: Failed installing fileset "OS-Core.CORE2-KRN,r=B.11.11".
Check the above output for details.

When I push a shell, these files are readable from the DVD so I'm not quite sure what's happening here. I've tried upping the debug level to 5 but I don't get any other information than this.

There's not a problem with the contents of the DVD since I re"swcopy"ed the contents on the Ignite server to retest this.

Has anyone else seen this sort of problem of have any idea where this install might be blocking ?

Oh yes, I've got version B.4.2.110 installed but the same thing happens on B.4.3.91 as well.

Cheers,
Norman
3 REPLIES 3
Michael Thomas_3
New Member

Re: Installing Core OS from Ignite server vs. DVD

Norman

I am trying to do the same thing, I wanted to created a custom intall DVD.

But I get the same error message has anyone manged to do this and if so how.

Thanks
Michael
Norman Yamane
Occasional Advisor

Re: Installing Core OS from Ignite server vs. DVD

Hi Michael,

I eventually got it working by changing the version of Ignite-UX I was using. I haven't had the same problem since switching to B.5.4.50

Cheers,
Norman
Michael Thomas_3
New Member

Re: Installing Core OS from Ignite server vs. DVD

Norman

Just a quick question did you have any problems with additional depots.

I have upgraded Ignite and the OS installs fine.

When the Ignite window start I can select my Applications from the additional depots on the DVD.

But when the Install process runs it only installs everything form my OS depot.

I can put everything in this depot but it would be easier if I could I have seprate depots for upgrades.

I included all the depots when I carested the lif voulme so not sure any help would be greafully recieved.

Thanks
Michael