Installing ignite on hp-ux but is very slow or quit !!!

[Manuales]

Hi ..
i'm trying installing ignite on hp-ux 10.20

Ignite-UX-10-20_A.3.7.95_HP-UX_B.10.01_70
0+800.depot

i'm doing next:
1.- sam
2.- software
3.- Target /var (is where i want to install it and where is the depot in this moment)
4.- i aply install on menu options

and is not doing something !!!!!

i'm attaching an image how it is ..
i have already extended var file system because was very small the space but now i'm only using 30% /var ..

why is happening this?
why is quit?

Thanks, Manuales.

[Manuales]

i'm sorry, i forgot attached log about installation.

could you tell me what is happening please?

Thanks Manuales.

[Raj D. · Accepted solution]

Hi Manuales ,

It seems progress is not there in the installation window,

Try doing the same activity from command prompt.

1. Change the directory ,to where the depot file is there.

# cd /path
# swinstall -s `pwd`/Ignite-UX-10-20_A.3.7.95_HP-UX_B.10.01_70
0+800.depot
--> select the product --> Action -->Install -->OK .

Check it , if it works,

2. To check after installation you can use:
# swlist -l product | grep -i ignite

It will show like this:
Ignite-UX B.3.7.95 HP-UX System Installation Services


Cheers,
Raj.

[Mark Nieuwboer]

Hi manuales,

What is very slow if its a big bundle with lots of kernel adjustments it can take a long time.
Sometimes about 30 to 60 minutes. But it's a very old OS version isn't it better to upgrade?

grtz. Mark

[Mark Nieuwboer]

Hi manuales,

What is very slow if its a big bundle with lots of kernel adjustments it can take a long time.
Sometimes about 30 to 60 minutes. But it's a very old OS version isn't it better to upgrade?

grtz. Mark
javascript:postAnswerSubmit('submit');
Submit

[Manuales]

Hi ...

this sofware has been installing since 30 minutes ago and continues in same status

i'm attaching an image (3rd).

why ?
is there a bad thing here?

Manuales.

[Manuales]

Hi ...

this sofware has been installing since 30 minutes ago and continues in same status

i'm attaching an image (3rd).

why ?
is there a bad thing here?

Manuales.

[Raj D.]

Hi Manuales,


Can you check ,

/var/adm/sw/swagent.log
and
/var/adm/sw/swintall.log
for any error.


hth,
Raj

[Manuales]

s1:/var/adm/sw->ls -lrt swagent.log swinstall.log
-rw-r--r-- 1 root sys 573151 Dec 21 15:41 swagent.log
-rw-r--r-- 1 root sys 221074 Dec 21 15:41 swinstall.log

Date in this moment:
s1:/var/adm/sw->date
Wed Dec 21 16:26:05 CST 2005


swagent.log contains:

======= 12/21/05 15:40:18 CST BEGIN install AGENT SESSION (pid=23294)
(jobid=s1-0201)

* Agent session started for user "root@s1". (pid=23294)

* Beginning Analysis Phase.
* Source: s1:/var/ignite_10.20.depot
* Target: s1:/
* Target logfile: s1:/var/adm/sw/swagent.log
* Reading source for product information.
* Reading source for file information.
* Executing preDSA command.
NOTE: The used disk space on filesystem "/" is estimated to increase
by 1 Kbytes.
This will leave 26875 Kbytes of available user disk space
after the installation.
NOTE: The used disk space on filesystem "/opt" is estimated to
increase by 45178 Kbytes.
This will leave 242476 Kbytes of available user disk space
after the installation.
NOTE: The used disk space on filesystem "/var" is estimated to
decrease by 12 Kbytes.
This will leave 808517 Kbytes of available user disk space
after the installation.
NOTE: The used disk space on filesystem "/usr" is estimated to
increase by 28 Kbytes.
This will leave 703592 Kbytes of available user disk space
after the installation.
NOTE: The bundle "B5725AA_APZ,r=A.3.7.95" is already installed. If
you wish to reinstall this bundle, change the "reinstall"
option to "true".
NOTE: The bundle "Ignite-UX-10-20,r=A.3.7.95" is already installed.
If you wish to reinstall this bundle, change the "reinstall"
option to "true".

* Summary of Analysis Phase:
* 8 of 8 filesets had no Errors or Warnings.
* The Analysis Phase succeeded.


* Beginning the Install Execution Phase.

Reviewin fs:

s1:/var/adm/sw->bdf / /opt /var /usr
Filesystem kbytes used avail %used Mounted on
/dev/vg00/lvol3 86016 57419 26839 68% /
/dev/vg00/lvol6 614400 308313 286986 52% /opt
/dev/vg00/lvol8 1228800 371145 804202 32% /var
/dev/vg00/lvol7 1024000 279419 698127 29% /usr

swinstall.log contains:
======= 12/21/05 15:40:13 CST BEGIN swinstall SESSION (interactive)

NOTE: The interactive UI was invoked, since no software was
specified.

* Session started for user "root@s1".

* Beginning Selection
* Before proceeding, you must mark software. Please mark at
least one software object in the Software Selection Window
using the Action menu item "Mark For Install".
agent_auto_exit false
agent_timeout_minutes 10000
allow_downdate false
allow_incompatible false
allow_multiple_versions false
autoreboot false
autorecover_product false
autoremove_job false
autoselect_dependencies true
autoselect_reference_bundles true
compress_files false
control_lang C
create_target_path true
defer_configure false
enforce_dependencies true
enforce_dsa true
enforce_kernbld_failure true
enforce_scripts true
follow_controller false
job_polling_interval 30
log_msgid 0
logdetail false
logfile /var/adm/sw/swinstall.log
loglevel 1
match_target false
mount_all_filesystems true
polling_interval 2
register_new_root true
reinstall false
reinstall_files true
reinstall_files_use_cksum true
retry_rpc 1
rpc_binding_info ncacn_ip_tcp:[2121] ncadg_ip_udp:[2121]
rpc_timeout 5
select_local true
software_view all_bundles
source_cdrom /SD_CDROM
source_type directory
source_directory s1:/var/ignite_10.20.depot
use_alternate_source false
verbose 1
write_remote_files false
* Source: s1:/var/ignite_10.20.depot
* Targets: s1:/
* Software selections:
Ignite-UX-10-20,r=A.3.7.95,a=HP-UX_B.10.01_700/800,v=HP
+ B5725AA_APZ,r=A.3.7.95,a=HP-UX_B.10.01_800,v=HP
Ignite-UX.BOOT-KERNEL,r=A.3.7.95,a=HP-UX_B.10.01_700/800,v=HP
Ignite-UX.BOOT-SERVICES,r=A.3.7.95,a=HP-UX_B.10.01_700/800,v=HP
Ignite-UX.FILE-SRV-10-20,r=A.3.7.95,a=HP-UX_B.10.01_700/800,v=HP
Ignite-UX.IGNITE,r=A.3.7.95,a=HP-UX_B.10.01_700/800,v=HP
Ignite-UX.IGNT-ENG-A-MAN,r=A.3.7.95,a=HP-UX_B.10.01_700/800,v=HP
Ignite-UX.MGMT-TOOLS,r=A.3.7.95,a=HP-UX_B.10.01_700/800,v=HP
Ignite-UX.OBAM-RUN,r=A.3.7.95,a=HP-UX_B.10.01_700/800,v=HP
Ignite-UX.RECOVERY,r=A.3.7.95,a=HP-UX_B.10.01_700/800,v=HP
* A "+" indicates an automatic selection due to dependency or
the automatic selection of a reference bundle.
* Beginning Analysis
* "s1:/": 2 bundles have the selected revision already
installed.
* Ending Analysis
* Beginning Task Execution
* Proceeding with Task Execution on the following targets:
* s1:/

what is happening !!!!

please help !!

Manuales.

[Raj D.]

Hi Manuales ,

Try the following:

0. Close all swinstall windows or sam.

1. Check status of swagentd
# ps -ef | grep swagent

2. Stop swagentd
# /usr/sbin/swagentd -k

3. Restart swagentd
# /usr/sbin/swagentd -r

4. Check with installing the Ignite-UX depot.


Hope this will help,

Cheers,
Raj.

[Manuales]

i can not any option to close sam, with tab i only can move to logfile or help (in 3rd image last post)

can i close the window (telnet emulation)
before close window i want see you next:

s1:/var/adm/sw->ps -fea | grep sw | more
root 0 0 0 Dec 16 ? 0:05 swapper
root 821 1 0 Dec 16 ? 0:18 /usr/sbin/swagentd
root 26718 25380 1 16:51:58 pts/0 0:00 grep sw
root 23295 821 0 15:40:18 ? 0:00 swagent /var/ignite_10.20.depot 1 16 ncacn_ip_tcp nc
adg_ip_u
root 23289 21269 0 15:40:13 ttyp1 0:12 swinstall -s /var/ignite_10.20.depot
root 23294 821 0 15:40:17 ? 0:14 swagent / 4 16 ncacn_ip_tcp ncadg_ip_udp:10.1.1.1[21
21] /var

is working?

any way, do i execute last commands to restart swagentd daemon?

Thanks friend !!!

:0)

Manuales.

[Manuales]

what is target host?
is the place where is going to be installed the software?

in this case could be /var?

Thanks, Manuales.

[Raj D.]

Hi Manuales,


You can kill the session and start a new one .

swinstall asks for 1. Source Depot Type:, 2. Source Host Name 3.Source Depot Path

1. Give Local Directory.
2. Your hostname.
3. path of the depot directory or file.

You can also install from the command line as given earlier.

hth,
Raj.

[Manuales]

Hi, it's me again ... :0)

well, i think a i have a problem.
At 8:00 a.m. it began to install hp-ux ignite, until this moment i does not finished !!! and status is next: with swinstall.log and i'm attaching an image how it sees is 4rth image in next powert point:

======= 12/22/05 08:33:40 CST BEGIN swinstall SESSION (interactive)

* Session started for user "root@pd01".

* Beginning Selection

======= 12/22/05 08:34:06 CST END swinstall SESSION (interactive)


======= 12/22/05 08:34:08 CST BEGIN swinstall SESSION (interactive)

* Session started for user "root@pd01".

* Beginning Selection
agent_auto_exit false
agent_timeout_minutes 10000
allow_downdate false
allow_incompatible false
allow_multiple_versions false
autoreboot false
autorecover_product false
autoremove_job false
autoselect_dependencies true
autoselect_reference_bundles true
compress_files false
control_lang C
create_target_path true
defer_configure false
enforce_dependencies true
enforce_dsa true
enforce_kernbld_failure true
enforce_scripts true
follow_controller false
job_polling_interval 30
log_msgid 0
logdetail false
logfile /var/adm/sw/swinstall.log
loglevel 1
match_target false
mount_all_filesystems true
polling_interval 2
register_new_root true
reinstall false
reinstall_files true
reinstall_files_use_cksum true
retry_rpc 1
rpc_binding_info ncacn_ip_tcp:[2121] ncadg_ip_udp:[2121]
rpc_timeout 5
select_local true
software_view all_bundles
source_cdrom /SD_CDROM
source_type directory
source_directory pd01:/var/ignite_10.20.depot
use_alternate_source false
verbose 1
write_remote_files false
* Source: pd01:/var/ignite_10.20.depot
* Targets: pd01:/
* Software selections:
Ignite-UX-10-20,r=A.3.7.95,a=HP-UX_B.10.01_700/800,v=HP
+ B5725AA_APZ,r=A.3.7.95,a=HP-UX_B.10.01_800,v=HP
Ignite-UX.BOOT-KERNEL,r=A.3.7.95,a=HP-UX_B.10.01_700/800,v=HP
Ignite-UX.BOOT-SERVICES,r=A.3.7.95,a=HP-UX_B.10.01_700/800,v=HP
Ignite-UX.FILE-SRV-10-20,r=A.3.7.95,a=HP-UX_B.10.01_700/800,v=HP
Ignite-UX.IGNITE,r=A.3.7.95,a=HP-UX_B.10.01_700/800,v=HP
Ignite-UX.IGNT-ENG-A-MAN,r=A.3.7.95,a=HP-UX_B.10.01_700/800,v=HP
Ignite-UX.MGMT-TOOLS,r=A.3.7.95,a=HP-UX_B.10.01_700/800,v=HP
Ignite-UX.OBAM-RUN,r=A.3.7.95,a=HP-UX_B.10.01_700/800,v=HP
Ignite-UX.RECOVERY,r=A.3.7.95,a=HP-UX_B.10.01_700/800,v=HP
* A "+" indicates an automatic selection due to dependency or
the automatic selection of a reference bundle.
* Beginning Analysis
* The analysis phase succeeded for "pd01:/".
* Ending Analysis
* Beginning Task Execution
* Proceeding with Task Execution on the following targets:
* pd01:/


WHAT'S HAPPENING??
Why does not installed?

Thanks, Manuales.

[Raj D.]

hi Manuales ,

Have you restared the swagentd and tried.


hth,
Raj.

[Mark Nieuwboer]

Hi manuales,

You want to install ignite but your logfile do say this version already is installed.
if you want to start all over again.
ps -ef|grep swinstall
kill the swinstall process.
$swagnetd -r
$swinstall
then if your sure you can make some changes with the default configuration of swinstall by options remove the x from dependicies on.
this will help speed up the install.
It can mean your software will not work correctly. normaly the software will work correctly.
grtz. Mark