Internal access to GSP with HP-UX 11i

[Michel PIGUEL]

Hello,
In HP-UX 11.0, I can internally acceded, with a 'cu' command, the GSP by configuring a tty device (/dev/tty1p0).
In HP-UX 11i it seems impossible.
Is it really true or have I misread ?
Regards,
Michel

[Leif Halvarsson_2]

Hi
It is possible to do in HP-UX 11.11 too, if it is possible or not seems to be hardware dependent. I can do it on our A400 servers with HP-UX11.11 installed but I can't get it work on our rp2430 boxes with the same OS release (and patches).

http://forums.itrc.hp.com/cm/QuestionAnswer/1,,0xadc03a7b3682d611abdb0090277a778c,00.html

[Xavier Gutierrez_1]

Hi, Michel.

Which systems are you using in both cases?

Regards.

[Michel PIGUEL]

Hi,
You're right. It seems that it's a revision problem of the GSP because I have the same error with a rp5470 HP-UX 11.0 and a rp5430 HP-UX 11i.

#cu -l /dev/tty1p0
Connect failed: line problem

Any idea ?
Regards

[Dietmar Konermann]

Hi!

The "internal port" functionality has been removed for the newer "B" type of the GSP. To get the GSP type, issue "HE" at the GSP prompt... B-GSPs use B.??.?? firmware.

Regards...
Dietmar.