Issue with hpterm

[titu]

HP-UX 11.23

when run this command ' hpterm ' getting this :
Error: Can't open display:
Error: Couldn't find per display information


I am able to proceed with dtterm and an xterm window.

Is it a bug with hpterm on this version of OS.
This is in a CDE environment.

Thanks in advance.

titu

[Robert-Jan Goossens]

Hi Titu,

Have a look at this thread.

http://forums11.itrc.hp.com/service/forums/questionanswer.do?threadId=1105829

Regards,
Robert-Jan

[titu]

Thanks Robert-jan

[YAQUB_1 · Accepted solution]

Hi Titu,

You also look below thread:-

http://forums11.itrc.hp.com/service/forums/questionanswer.do?threadId=583915

Rgds -- Yaqub
HP Support!!!

[titu]

Hi all ,

Still the same issue , i have no error message in /var/dt/Xerrors.

Can anyone help on this.

thanks in advance.

titu

[YAQUB_1]

Hi Titu,

This is the production system or running any web application, if both are not then U remove the CDE & reinstall again & check.

Thanks--Yaqub
HP Support!!!

[Jeeshan]

Hi titu

generally the error comes when you are in command mode from remote machine.

If you login through the reflection and there if you run hpterm, then no error should be come.

[titu]

Hi Ahsan and YAQUB ,

Thanks for reply .

I will try to remove CDE & reinstall again & check.

But Ahsan my other things like dtterm and an xterm window and xclock working with no problem.

Thanks in advance.

titu

[Jeeshan]

HI

Are you just running the terminals as individual clients or within CDE ?

did u check the name resolution issue or any inconsistency?

[titu]

Hi ashan,

i am ruuning the terminal in CDE.

titu

[titu]

Hi ashan,

sorry for erlier reply

i am running hpterm within CDE.

no issue with name resolution issue or any inconsistency.

titu

[Jeeshan]

On the HPUX server that you are using to run the full CDE environment, If you have the "/etc/nsswitch.conf" looking at the "/etc/hosts" file first and then DNS.then ithere may be name resolution problem.

then you may need to add an entry of your IP address from where you are accessing through the CDE in /etc/hosts file, restart the CDE then try the hpterm.

[YAQUB_1]

Hi Titu,

Can U send me "dr_dt" command output, I have jest check all the required latest patches is there?

Thanks--Yaqub
HP Support!!!