HPE Community
Operating System - HP-UX
1835910 Members
3087 Online
110086 Solutions
New Discussion

K200 HPUX 11.11 adding Modem

 
Tony Flaherty
Frequent Advisor

‎10-30-2002 02:14 AM

‎10-30-2002 02:14 AM

K200 HPUX 11.11 adding Modem

Hi,

I've installed hpux 11.11 on my K200 but the external modem is no longer working. I've added the following line to inittab

ttp5:234:respawn:/usr/lbin/uucp/uugetty -r -t 60 -h ttyd0p7 19200

but I guess the tty is incorrect. How do I determine the correct tty for the modem? Do I need to create a device file or something for the modem?

Thanks,

Tony
There are 10 types of people in the world, Those who understand Binary and those who don't.
0 Kudos
Reply
1 REPLY 1
Darren Prior
Honored Contributor

‎10-30-2002 02:55 AM

‎10-30-2002 02:55 AM

Re: K200 HPUX 11.11 adding Modem

Hi Tony,

Probably the easiest way is to use SAM - it'll create the device files for you and add the appropriate inittab entry.

If the device file doesn't exist you will be seeing a fair number of errors in syslog as it'll log each attempt at respawning the getty. I'd suggest that you remove your inittab entry and run init q before using SAM.

You should also be aware that if you are using the external modem connector on the core i/o card (rather than a separate mux) that this port is only available if configured from the console, and if remote access is disabled.

regards,

Darren.
Calm down. It's only ones and zeros...
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.