Lan card unclaimed

[Hamerlik Christophe]

Hello,

Here is the output of the ioscan -nfC command :

lan 0 4 btlan1 UNCLAIMED UNKNOWN HP HP-PB 100 Base TX card

I suppose I don't have the good device files for that card (HP-PB 100 Base Tx Card).

Where can I find what are the good device files for that card ?

Thanks a lot.
Christophe.

[Ashwani Kashyap]

It seems there is no driver for the btlan1 HP-PB 100BT card in the kernel .

DO an lsdev to find out if the driver is in the kernel .

If not install the river form one of your application CD's . It will require a reboot

[steven Burgess_2]

Hi

Check which card is configured in your kernel

what /stand/vmunix | grep btlan

Have a look at the below link for configuration and trouble shooting for your lan cardHere are the notes from the techsolutions site


Here are your config files and drivers

http://techsolutions.hp.com/fe/configs.html#config_files

http://techsolutions.hp.com/fe/install.html

http://techsolutions.hp.com/fe/configure.html

http://techsolutions.hp.com/fe/verification.html

http://techsolutions.hp.com/fe/troubleshooting.html

http://techsolutions.hp.com/fe/diagnostic.html


HTH

Steve

[S.K. Chan]

Have you got J2759BA (HP-PB 100BaseT/900) installed ? This is for 11.x I think. If not get it install, it's in the Application CDs. I have a K-class (10.20) using a similar card and I noticed on that machine I had J2760AA (HP-PB 100BaseT) installed.

[MANOJ SRIVASTAVA]

I dont think you can find good device files etc , you need to reinstall drive ,

You may like to look at the following :

http://techsolutions.hp.com/fe/configs.html#config_files


and this link for the procedure:
http://docs.hp.com/hpux/pdf/J3622-90011.pdf



Manoj Srivastava