Operating System - HP-UX
1832857 Members
3137 Online
110048 Solutions
New Discussion

libiconv/openssl needed for HP-UX 10.20 for openssh

 
SOLVED
Go to solution

libiconv/openssl needed for HP-UX 10.20 for openssh

Hi there,
I need a libiconv-1.8-sd-10.20.depot and openssl-0.9.7-sd-10.20.depot.gz or lower and could not find it on http://hpux.asknet.de/. The ..-ss.. will be saved as ..ss-11.00.tar.gz, maybe it is usable / maybe not (I do not know).
Can anyone give a hint where I can get the depots.
Klaus
all for one and one for all
4 REPLIES 4
Sridhar Bhaskarla
Honored Contributor
Solution

Re: libiconv/openssl needed for HP-UX 10.20 for openssh

Hi,

Most likely you won't find precompiled versions for 10.20 as it has been declared obsolete.

Here is a public site that has few softwares bundles. Try your luck there. I have seen openssh and openssl for 10.20 there.

http://www.encap.org/search/search.fcgi

I suggest you take sometime, download the source code and compile them.

-Sri
You may be disappointed if you fail, but you are doomed if you don't try
Stefan Farrelly
Honored Contributor

Re: libiconv/openssl needed for HP-UX 10.20 for openssh

http://hpux.cs.utah.edu/hppd/hpux/Languages/openssl-0.9.7/

http://hpux.cs.utah.edu/hppd/hpux/Development/Libraries/libiconv-1.8/

Download the source and compile on 10.20
Im from Palmerston North, New Zealand, but somehow ended up in London...

Re: libiconv/openssl needed for HP-UX 10.20 for openssh

Thanks a lot. It should be work for me.
Klaus
all for one and one for all
Stefan Farrelly
Honored Contributor

Re: libiconv/openssl needed for HP-UX 10.20 for openssh

If you want openssh 3.1p1 for 10.20 in depot format email me and I will email it back. Its 1.8Mb gzipped (gunzip, then swinstall)

Stefan


Im from Palmerston North, New Zealand, but somehow ended up in London...